Effect of field shaper structure on microstructure and properties of magnetic pulse assisted semi-solid brazing joint

被引：0
作者：
Deng L. [1 ]
Huang S. [1 ,2 ]
Yang M. [3 ]
Qian D. [1 ,2 ]
Feng K. [1 ]
Ou B. [1 ]
机构：
[1] Wuhan University of Technology, Wuhan
[2] Hubei Engineering and Technology Research Center of Material Green Precision Forming, Wuhan
[3] Shanghai Technician School, Shanghai
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2022年 / 43卷 / 01期
关键词：
Cu/Al tubes joint; Electromagnetic forming; Field shaper; Semi-solid brazing;
D O I：
10.12073/j.hjxb.20210513001
中图分类号：
学科分类号：
摘要：
The magnetic pulse assisted semi-solid brazing process of Cu/Al tubes with constant diameter field shaper and cone angle field shaper was analyzed by adopting the method of multi-physics coupling simulation of electromagnetic, structure and flow fields. The deformation behavior of outer tube and the shear flow behavior of semi-solid solder were investigated. The results shown that, the shear stress and corresponding shear flow velocity of solder were the highest at the top, followed by the bottom and the weakest in the middle by using constant diameter field shaper, which leads to the difference in removal of oxide film in overlap area, and even affects metallurgical bonding at the interface. The cone angle field shaper can more reasonably meet the requirements of the coordination between the deformation of outer tube and the shear rheology of solder without flux brazing, effectively improve the rheology behavior of solder and make the shear stress, shear flow velocity, removal effect of oxide film relatively uniform in the whole overlap area, which is beneficial to improve the quality of interface connection. Based on the analysis results, an improved field shaper was manufactured, and the brazing experiment and related tests were carried out. The results shown that, compared with constant diameter field shaper, the cone angle field shaper can effectively improve the interfacial bonding quality of Cu/Al joint, refine the grain of brazing seam, and finally improve the shear strength of brazing joint. Copyright © 2022 Transactions of the China Welding Institution. All rights reserved.
引用
收藏
页码：48 / 54
页数：6
相关论文
共 23 条
  • [1] Zhou Xianglong, Study on process and properties of joining Al/Cu dissimilar metals, (2017)
  • [2] Su H, Huang L, Li J, Et al., Two-step electromagnetic forming: A new forming approach to local features of large-size sheet metal parts, International Journal of Machine Tools & Manufacture, 124, pp. 99-116, (2017)
  • [3] Zhang W, Shen Y, Yan Y, Et al., Dissimilar friction stir welding of 6061 Al to T2 pure Cu adopting tooth-shaped joint configuration: microstructure and mechanical properties, Materials Science & Engineering A, 690, pp. 355-364, (2017)
  • [4] Xia C, Li Y, Puchkov U, Et al., Crack analysis near vacuum brazing interface of Cu/Al dissimilar materials using Al-Si brazing alloy, Mater Science Journal, 25, 3, pp. 383-387, (2009)
  • [5] Wu Kai, Jia Hepeng, Sun Yu, Et al., Research progress of friction stir welding technology, Machine Building & Automation, 49, 6, pp. 1-9, (2020)
  • [6] Lee W B, Bang K S, Jung S B., Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing, Journal of Alloys & Compounds, 390, 1, pp. 212-219, (2005)
  • [7] Lueg-Althoff J, Bellmann J, Hahn M, Et al., Joining dissimilar thin-walled tubes by magnetic pulse welding, Journal of Materials Processing Technology, 279, (2019)
  • [8] Meng Z, Gong M, Guo W, Et al., Numerical simulation of the joining interface of dissimilar metals in vaporizing foil actuator welding: Forming mechanism and factors, Journal of Manufacturing Processes, 60, pp. 654-665, (2020)
  • [9] Raoelison R N, Sapanathan T, Buiron N, Et al., Magnetic pulse welding of Al/Al and Al/Cu metal pairs: Consequences of the dissimilar combination on the interfacial behavior during the welding process, Journal of Manufacturing Processes, 20, pp. 112-127, (2015)
  • [10] Xu W, Sun X., Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals, Science & Technology of Welding & Joining, 21, 7, pp. 592-599, (2016)
123