Experimental study on nano-zinc oxide desulfurizer with attapulgite as support for H 2S removal

被引：0

作者：

Wang, Qingning ^{[1
]}

Han, Weiliang ^{[1
]}

Jiang, Jinlong ^{[2
]}

Li, Lan ^{[1
]}

Jiao, Linhong ^{[1
]}

机构：

[1] School of Petrochemical Engineering, Lanzhou University of Technology

[2] Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, Faculty of Life Science and Chemical Engineering, Huaiyin Institute of Technology

来源：

Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica (Petroleum Processing Section) | 2012年 / 28卷 / 05期

关键词：

Attapulgite; Desulfurizer; Nano-zinc oxide; Sedimentation;

D O I：

10.3969/j.issn.1001-8719.2012.05.009

中图分类号：

学科分类号：

摘要：

The nano-zinc oxide desulfurizer with attapulgite as support(Z/GATB) was obtained through the sedimentation of nano-zinc oxide on attapulgite, and used for H 2S removal. The preparation conditions were optimized by means of orthogonal method with sulfur content capacity for H 2S removal as goal. The results showed that the optimal preparation conditions of Z/GATB were the 3% sodium dodecyl benzene sulfonate as modification agent, treatment with 1% nitric acid, the precipitation temperature of 30°C, precipitation pH value of 10-12, precipitation time of 6 h, drying temperature of 120°C, calcination temperature of 250°C and calcinations time of 3 h, under which the Z/GATB desulfurizer could be obtained possessing the maximum sulfur content capacity of 20.40% for the removal of high concentration H 2S.

引用

页码：757 / 763

页数：6

共 16 条

[1]

Wang X., Tang M., Jia J., Et al., Potential application of mesoporous silica modified with zinc oxide for hydrogen sulfide capture from gas stream, Chemical Industry and Engineering Progress, 29, 9, pp. 1760-1766, (2010)

[2]

Wang R., Bao X., Reaction mechanism of hydrogen sulfide with sodium phosphomolybdate, Acta Petrolei Sinica(Petroleum Processing Section), 16, 6, pp. 70-72, (2000)

[3]

Liu Y., Liu C., Effects of hydrogen sulphide on residue hydrodemetallization, Acta Petrolei Sinica(Petroleum Processing Section), 26, 3, pp. 389-393, (2010)

[4]

Pineda M., Palacios J.M., Alonso L., Et al., Performance of zinc oxide based sorbents for hot coal gas desulfurization in multicycle tests in a fixed-bed reactor, Fuel-Guildford, 79, 8, pp. 885-895, (2000)

[5]

Zhang X., Liu Y., Zhi Z., Et al., Investigation on nanocrystalline ZnO thin films prepared by thermal oxidation of ZnS thin films, Chinese Journal of Semiconductors, 24, 1, pp. 44-48, (2003)

[6]

Hong R., Xu L., Ren Z., Et al., Nanosized zinc oxide prepared by homogeneous precipitation and its photocatalytic property, Environmental Protection of Chemical Industry, 25, 3, pp. 231-234, (2005)

[7]

Shao C., Jiang A., Yan B., Et al., Research on the process condition of low temperature desulfur of nanocrystalline ZnO, Material Science and Technology, 13, 4, pp. 407-410, (2005)

[8]

Shao C., Jiang A., Li F., Et al., Study on selective oxidation of H <sub>2</sub>S with nanometer ZnO at room temperature, Journal of Fuel Chemistry and Technology, 33, 4, pp. 470-473, (2005)

[9]

Wang Q., Zong X., Jiang R., Et al., Decoloration of FCC gasoline by attapulgite clay decolorant, Acta Petrolei Sinica(Petroleum Processing Section), 26, 5, pp. 819-824, (2010)

[10]

Wang Q., Zhang Z., Wang Y., Et al., Sulfide removal from RFCC gasoline by attapulgite desulfurizer, Acta Petrolei Sinica(Petroleum Processing Section), 27, 6, pp. 916-923, (2011)

← 1 2 →