Friction property of multi-layer interlocked fabric reinforced COPNA resin composite

被引:0
|
作者
Industrial Technology Center of Tochigi Prefecture, 367-1, Karinuma-cho, Utsunomiya-shi, Tochigi 321-3224, Japan [1 ]
不详 [2 ]
机构
关键词
Composite materials - Friction - Multilayers - Thermal conductivity;
D O I
10.2115/fiber.62.175
中图分类号
学科分类号
摘要
Composite materials were made from multi-layer interlocked fabrics which were woven with pitch-based carbon fiber rovings and COPNA resin matrix. Thermal conductivity of the composite materials were measured by guarded heat flow meter method and transient hot wire method. Limiting PV value of the composite materials were measured by using cylinder/plate friction machine. Then, the relation ship between the structure of multi-layer interlocked fabric and those properties of materials was investigated. The result are summarized as follows; The thermal conductivity and limiting PV value of composite materials were higher than those of single COPNA resin material. It was found that self-lubrication of the composite materials was effectively expressed by the fabric structure with carbon fiber ravings highly dispersed.
引用
收藏
相关论文
共 50 条
  • [41] Preparation and Properties of Multi-Layer SOEC Composite Anodes
    Kong Jiangrong
    Zhang Yong
    Deng Changsheng
    Xu Jingming
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 692 - 695
  • [42] Exact analysis of multi-layer piezoelectric/composite cantilevers
    Shi, Z. F.
    Xiang, H. J.
    Spencer, B. F., Jr.
    SMART MATERIALS AND STRUCTURES, 2006, 15 (05) : 1447 - 1458
  • [43] A Multi-layer Composite Model for Human Pose Estimation
    Duan, Kun
    Batra, Dhruv
    Crandall, David
    PROCEEDINGS OF THE BRITISH MACHINE VISION CONFERENCE 2012, 2012,
  • [44] A novel composite multi-layer piezoelectric energy harvester
    Lu, Qingqing
    Liu, Liwu
    Scarpa, Fabrizio
    Leng, Jinsong
    Liu, Yanju
    COMPOSITE STRUCTURES, 2018, 201 : 121 - 130
  • [45] "Corrosion" on multi-layer composite pipes - the case of damage
    Pajonk, Gunther
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2023, 60 (11): : 716 - 783
  • [46] Preparation and performance of SOFC multi-layer composite cathodes
    Jing, Bo
    Sun, Jun-Cai
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2009, 38 (SUPPL. 1): : 346 - 349
  • [47] Behavior to Dynamic Loads of Multi-layer Composite Structures
    Geanta, Victor
    Voiculescu, Ionelia
    Chereches, Tudor
    Zecheru, Teodora
    Matache, Liviu
    Rotariu, Adrian
    MATERIALE PLASTICE, 2019, 56 (02) : 460 - 465
  • [48] Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures
    Gao, Jincheng
    Li, Xu
    Wei, Jianhui
    Zhang, Yuheng
    Wang, Jihui
    Ding, Anxin
    APPLIED COMPOSITE MATERIALS, 2024,
  • [49] Multi-layer composite hybrid transducer for medical ultrasound
    Mills, DM
    Smith, SW
    2000 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1 AND 2, 2000, : 1153 - 1156
  • [50] Compression-loaded multi-layer composite tubes
    Hausding, Jan
    Lieboldt, Matthias
    Franzke, Gerd
    Helbig, Ulf
    Cherif, Chokri
    COMPOSITE STRUCTURES, 2006, 76 (1-2) : 47 - 51