共 50 条
In-situ viscoelastic characterization and modeling of ice cream
被引：0
|作者：
Rahman N.A.A.
[1
]
Parid D.M.
[1
]
Razak S.Z.A.
[1
]
Johari A.M.
[1
]
Talib A.T.
[1
]
Mohammed M.A.P.
[1
]
Baharuddin A.S.
[1
]
Wakisaka M.
[2
]
机构：
[1] Department of Process and Food Engineering, Faculty of Engineering, Universiti Putra Malaysia, UPM Serdang, 43400, Selangor
[2] Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu
关键词：
Compression test device;
Ice cream;
Mechanical characterization;
Viscoelastic behavior;
D O I：
10.1016/j.jfoodeng.2019.05.039
中图分类号：
学科分类号：
摘要：
Hard ice cream has been mechanically characterized in-situ by using compression stress relaxation tests. However, the main challenge in the study of ice cream mechanics is the need to perform analyses at low temperatures (−20 °C). Therefore, in this study, a customized compression test device was developed, which can be used for experimental analysis at low temperatures (−20 °C) inside a freezer. The viscoelastic behavior of hard ice cream was analyzed using the test device, as observed from the reduction of stress at holding deformation. Viscoelastic modeling was then performed using the finite element method by using user material subroutine. The model agreed to the tests results at small deformation (1 mm deformation), but it required the use of a softening function at large deformation. The findings of this study suggest the non-linear viscoelastic behavior of hard ice cream under low temperatures. © 2019 Elsevier Ltd
引用
收藏
页码：96 / 101
页数：5
相关论文