Enhanced tribological performance of transesterified corn oil biodiesel blends with CuO and TiO2 nanoparticles: experimental analysis on wear and friction reduction using environment friendly lubricants

被引：1

作者：

Surakasi, Raviteja ^{[1
]}

Raja, Subramani ^{[2
]}

Praveenkumar, Vijayakumar ^{[3
]}

Ravikant, Yajjala ^{[1
]}

Rusho, Maher Ali ^{[4
]}

Sharma, Shubham ^{[5
,6
,7
]}

Kalyani, Teku ^{[8
]}

Bisht, Yashwant Singh ^{[9
]}

Kumar, Abhinav ^{[10
,11
,12
]}

机构：

[1] Lendi Inst Engn & Technol, Dept Mech Engn, Vizianagaram 535005, Andhra Pradesh, India

[2] Chennai Inst Technol, Ctr Sustainable Mat & Surface Metamorphosis, Chennai, Tamilnadu, India

[3] Amrita Vishwa Vidyapeetham, Dept Mech Engn, Amirtapuri 690525, India

[4] Univ Colorado, Engn Engn Management, Lockheed Matin Engn Management, Boulder, CO 80308 USA

[5] Western Caspian Univ, Dept Tech Sci, Baku, Azerbaijan

[6] Chitkara Univ, Chitkara Univ Inst Engn & Technol, Ctr Res Impact & Outcome, Rajpura, Punjab, India

[7] Lebanese Amer Univ, Dept Mech Engn, Kraytem 1102-2801, Beirut, Lebanon

[8] Raghu Engn Coll A, Dept Mech Engn, Dakamarri 531162, India

[9] Uttaranchal Univ, Uttaranchal Inst Technol, Dept Mech Engn, Dehra Dun 248007, India

[10] Ural Fed Univ, Dept Nucl & Renewable Energy, Boris Yeltsin,19 Mira St, Ekaterinburg 620002, Russia

[11] Karpagam Acad Higher Educ, Dept Mech Engn, Coimbatore 641021, India

[12] Karpagam Acad Higher Educ, Ctr Energy & Environm, Coimbatore 641021, India

来源：

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING | 2024年 / 22卷 / 10期

关键词：

biodiesel blends; tribological characteristics; nanoparticle-enhanced lubricants; pin-on-disk equipment; mechanical systems; METAL-MATRIX COMPOSITES; GRAPHENE OXIDE; CARBON NANOTUBES; CALCIUM GREASE; FABRICATION; ADDITIVES; BEHAVIOR; NANOSHEETS; ENGINE;

D O I：

10.1515/ijcre-2024-0156

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The tribological characteristics of biodiesel blends containing corn oil and nanoparticles of copper oxide and titanium dioxide were examined in this study. The prepared biodiesel blends along with nanopowders are blended with 20W-40 lubricant. The aim was to explore the potential of these blends as lubricants in various mechanical systems. A pin-on-disk equipment was used to perform the tribological tests under different stresses. The optimal outcomes were achieved with the incorporation of 100 ppm CuO with BD20, which reduced the coefficient of friction by as much as 80 % and decreased the wear rate by up to 75 % in comparison to pure biodiesel. There is also a decrease in frictional force for the sample BD20 with 100 ppm CuO and pin temperature was minimum for the sample BD20. The results indicate the viability of using corn oil biodiesel mixtures containing CuO and TiO2 nanoparticles as eco-friendly lubricants in diverse industrial applications.

引用

页码：1209 / 1222

页数：14

共 84 条

[1] RETRACTED: Nanometal-Based Magnesium Oxide Nanoparticle with C. vulgaris Algae Biodiesel in Diesel Engine (Retracted Article) [J].

Arunprasad, J. ;

Krishna, Alla Naveen ;

Radha, Dharavathu ;

Singh, Mandeep ;

Surakasi, Raviteja ;

Gidebo, Tewodros Derese .

JOURNAL OF NANOMATERIALS, 2022, 2022

[2] Implications of prolonged sub-zero environmental conditioning and temperature cooling on the microstructural morphological, and mechanical properties of SiC reinforced Al6061-T6 friction stir spot welded joints [J].

Chaudhary, Neeru ;

Singh, Sarbjit ;

Garg, Mohinder Pal ;

Kishore, Hreetabh ;

Sharma, Shubham ;

Dwivedi, Shashi Prakash ;

Abbas, Mohamed ;

Khan, M. Ijaz ;

Makki, Emad .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 :4359-4372

[3] Optimization of FDM Printing Process Parameters on Surface Finish, Thickness, and Outer Dimension with ABS Polymer Specimens Using Taguchi Orthogonal Array and Genetic Algorithms [J].

Chohan, Jasgurpreet Singh ;

Kumar, Raman ;

Yadav, Aniket ;

Chauhan, Piyush ;

Singh, Sandeep ;

Sharma, Shubham ;

Li, Changhe ;

Dwivedi, Shashi Prakash ;

Rajkumar, S. .

MATHEMATICAL PROBLEMS IN ENGINEERING, 2022, 2022

[4] Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts [J].

Chohan, Jasgurpreet Singh ;

Kumar, Raman ;

Singh, T. H. Bhatia ;

Singh, Sandeep ;

Sharma, Shubham ;

Singh, Jujhar ;

Mia, Mozammel ;

Pimenov, Danil Yurievich ;

Chattopadhyaya, Somnath ;

Dwivedi, Shashi Prakash ;

Kaplonek, Wojciech .

MATERIALS, 2020, 13 (22) :1-15

[5] Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm [J].

Chohan, Jasgurpreet Singh ;

Mittal, Nitin ;

Kumar, Raman ;

Singh, Sandeep ;

Sharma, Shubham ;

Singh, Jujhar ;

Rao, Kalagadda Venkateswara ;

Mia, Mozammel ;

Pimenov, Danil Yurievich ;

Dwivedi, Shashi Prakash .

POLYMERS, 2020, 12 (10) :1-18

[6] Tribological behavior of copper nanoparticles as additives in oil [J].

Choi, Y. ;

Lee, C. ;

Hwang, Y. ;

Park, M. ;

Lee, J. ;

Choi, C. ;

Jung, M. .

CURRENT APPLIED PHYSICS, 2009, 9 (02) :E124-E127

[7] Smart contract and IPFS-based trustworthy secure data storage and device authentication scheme in fog computing environment [J].

Dwivedi, Sanjeev Kumar ;

Amin, Ruhul ;

Vollala, Satyanarayana .

PEER-TO-PEER NETWORKING AND APPLICATIONS, 2023, 16 (01) :1-21

[8] Synergistic performance evaluation of copper-WC-graphene composites: Microstructure, mechanical properties, corrosion, and wear behavior under microwave sintering [J].

Dwivedi, Shashi Prakash ;

Chaudhary, Vijay ;

Sharma, Shubham .

MATERIALS CHEMISTRY AND PHYSICS, 2024, 317

[9] Synthesis of high entropy alloy AlCoCrFeNiCuSn reinforced AlSi7Mg0.3 based composite developed by solid state technique [J].

Dwivedi, Shashi Prakash ;

Sharma, Shubham .

MATERIALS LETTERS, 2024, 355

[10] Homogeneity, metallurgical, mechanical, wear, and corrosion behavior of Ni and B4C coatings deposited on 304 stainless steels developed by microwave cladding technique [J].

Dwivedi, Shashi Prakash ;

Sharma, Shubham ;

Srivastava, Arun Pratap ;

Sethi, Vandana Arora ;

Mohammed, Kahtan A. ;

Kumar, Abhinav ;

Khan, M. Ijaz ;

Abbas, Mohamed ;

-Eldin, Elsayed M. Tag .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 :5854-5867

← 1 2 3 4 5 6 7 8 9 →