Modelling and simulation for the prediction of surface roughness in plane magnetic abrasive finishing

被引：3

作者：

Khatri, Er Atul ^{[1
]}

Yadava, Vinod ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad

来源：

International Journal of Industrial and Systems Engineering | 2008年 / 3卷 / 02期

关键词：

FEM; FEMroughness; MAF; MAFB; Magnetic abrasive finishing; Magnetic abrasive flexible brush; Magnetic abrasive particle; MAP; Material removal; Surface roughness;

D O I：

10.1504/IJISE.2008.016744

中图分类号：

学科分类号：

摘要：

The final machining (or finishing) of precision parts with high level of surface finish and close tolerance is making the application of Magnetic Abrasive Finishing (MAF) technology increasingly important. MAF is a magnetic field controlled advanced finishing process used for fine finishing of metals and non-metals. In MAF, the workpiece is kept between the two poles of electromagnet and the working gap is filled with Magnetic Abrasive Particles (MAPs). MAPs form a Magnetic Abrasive Flexible Brush (MAFB) due to the effect of magnetic field in working gap. This paper focuses on the modelling and simulation of MAF process for the theoretical prediction of surface roughness on the workpiece surface. A finite element-based model is developed to find the magnetic scalar potential distribution in the working gap. A theoretical model is also developed for the prediction of surface roughness on the workpiece surface due to the indentation and microcutting by MAPs under magnetic machining pressure. The simulation results are compared with the experimental results available in the literature and they are found to agree well. The effects of different process parameters are also studied. Copyright © 2008 Inderscience Enterprises Ltd.

引用

页码：189 / 210

页数：21

共 19 条

[1]

Bastos P.A., Ida N., Electromagnetics and Calculation of Fields, (1997)

[2]

Chang G.W., Yan B.H., Hsu R.T., Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives, International Journal of Machine Tools and Manufacture, 42, pp. 575-583, (2002)

[3]

Fox M., Agrawal K., Shinmura T., Komandury R., Magnetic abrasive finishing of rollers, Annals of CIRP, 43, 1, pp. 181-184, (1994)

[4]

Griffith D.J., Introduction to Electromagnetism, (2000)

[5]

Griffith D.J., Introduction to Electromagnetism, (2003)

[6]

Khatri A., Modeling and simulation for the prediction of surface roughness during plane magnetic abrasive finishing (MAF) using FEM, (2006)

[7]

Kim J.-D., Polishing of ultra-clean inner surfaces using magnetic force, International Journal of Advanced Manufacturing Technology, 21, pp. 91-97, (2003)

[8]

Kim J.D., Choi M.S., Simulation for the prediction of surface-accuracy in magnetic abrasive machining, Journal of Materials Processing Technology, 53, pp. 630-642, (1995)

[9]

Kremen G.Z., Elsayed E.A., Rafalorich V.I., Mechanism of material removal in magnetic abrasive process and the accuracy of machining, International Journal of Production Research, 34, 9, pp. 2629-2638, (1996)

[10]

Matsunaga M., Shinmura T., Takazava K., Hitano E., Study on magnetic abrasive finishing characteristics, Annals of the CIRP, 39, 1, pp. 325-328, (1993)

← 1 2 →