Precision cutting of ceramics with milling tool of single crystalline diamond

被引：0
|
作者：
Suzuki, Hirofumi [1 ]
Okada, Mutsumi [2 ]
Okada, Koichi [3 ]
Ito, Yosuke [3 ]
机构：
[1] Department of Mechanical Engineering, Chubu University, 1200 Matsumoto, Kasugai, 487-8501, Aichi
[2] Chubu University, 1200 Matsumoto, Kasugai, 487-8501, Aichi
[3] NS Tool Co. Ltd, 2-11 Matsuzakataira, Taiwa, Kurokawa, 981-3408, Miyagi
来源：
International Journal of Automation Technology | 2015年 / 9卷 / 01期
关键词：
Micro milling tool; Precision cutting; Single crystalline diamond; Tool wear; Tungsten carbide;
D O I：
10.20965/ijat.2015.p0026
中图分类号：
学科分类号：
摘要：
Micro milling tools made of Single Crystalline Diamond (SCD) have been developed to machine micro dies and molds made of ceramics. The milling tools of a cylindrical SCD having many sharp cutting edges are fabricated 3-dimensionally by scanning a laser beam. Flat shape of binder-less tungsten carbide mold was cut with the developed milling tool to evaluate the tool wears and its life. Some micro aspheric molds of tungsten carbide were cut with the milling tool at a rotational speed of 50,000 min−1. The ceramic molds were cut in the ductile mode. By cutting with the milling tool, the form accuracy obtained was about 100 nm P–V and the surface roughness 8 nm Rz. © 2014, Fuji Technology Press. All rights reserved.
引用
收藏
页码：26 / 32
页数：6
相关论文
共 50 条
  • [21] Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool
    Ming Zhou
    B.K.A. Ngoi
    X.J. Wang
    Tribology Letters, 2003, 15 : 211 - 216
  • [22] Ultra-precision diamond cutting of steel molds
    Brinksmeier, E.
    Glaebe, R.
    Osmer, J.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 551 - 554
  • [23] Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond
    Zhang, Jianguo
    Suzuki, Norikazu
    Wang, Yilong
    Shamoto, Eiji
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (11) : 2644 - 2659
  • [24] The analysis of tool wear in milling CFRP with different diamond coated tool
    Yang X.
    Li Y.
    Yan G.
    Liu J.
    Yu D.
    1600, Trans Tech Publications Ltd (667): : 231 - 236
  • [25] A cutting power model for tool wear monitoring in milling
    Shao, H
    Wang, HL
    Zhao, XM
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (14) : 1503 - 1509
  • [26] Tool wear control in single-crystal diamond cutting of steel by using the ultra-intermittent cutting method
    Song, YoungChan
    Nezu, Kentaro
    Park, Chun-Hong
    Moriwaki, Toshimichi
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (3-4) : 339 - 343
  • [27] Wear characteristics of diamond tool in ultraprecision raster milling
    Z. Q. Yin
    S. To
    W. B. Lee
    The International Journal of Advanced Manufacturing Technology, 2009, 44 : 638 - 647
  • [28] Influence of cutting parameters on PCD tool wear during milling tungsten carbide
    Hao Li
    Wei Zhao
    Xutao Gao
    Weiqi Shi
    Ning He
    The International Journal of Advanced Manufacturing Technology, 2024, 130 : 1165 - 1180
  • [29] Wear characteristics of diamond tool in ultraprecision raster milling
    Yin, Z. Q.
    To, S.
    Lee, W. B.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (7-8) : 638 - 647
  • [30] Influence of cutting parameters on PCD tool wear during milling tungsten carbide
    Li, Hao
    Zhao, Wei
    Gao, Xutao
    Shi, Weiqi
    He, Ning
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (1-2) : 985 - 993
12345