Precision cutting of ceramics with milling tool of single crystalline diamond

被引：0
|
作者：
Suzuki, Hirofumi [1 ]
Okada, Mutsumi [2 ]
Okada, Koichi [3 ]
Ito, Yosuke [3 ]
机构：
[1] Department of Mechanical Engineering, Chubu University, 1200 Matsumoto, Kasugai, 487-8501, Aichi
[2] Chubu University, 1200 Matsumoto, Kasugai, 487-8501, Aichi
[3] NS Tool Co. Ltd, 2-11 Matsuzakataira, Taiwa, Kurokawa, 981-3408, Miyagi
来源：
International Journal of Automation Technology | 2015年 / 9卷 / 01期
关键词：
Micro milling tool; Precision cutting; Single crystalline diamond; Tool wear; Tungsten carbide;
D O I：
10.20965/ijat.2015.p0026
中图分类号：
学科分类号：
摘要：
Micro milling tools made of Single Crystalline Diamond (SCD) have been developed to machine micro dies and molds made of ceramics. The milling tools of a cylindrical SCD having many sharp cutting edges are fabricated 3-dimensionally by scanning a laser beam. Flat shape of binder-less tungsten carbide mold was cut with the developed milling tool to evaluate the tool wears and its life. Some micro aspheric molds of tungsten carbide were cut with the milling tool at a rotational speed of 50,000 min−1. The ceramic molds were cut in the ductile mode. By cutting with the milling tool, the form accuracy obtained was about 100 nm P–V and the surface roughness 8 nm Rz. © 2014, Fuji Technology Press. All rights reserved.
引用
收藏
页码：26 / 32
页数：6
相关论文
共 50 条
  • [1] Cutting of alumina ceramics by single crystal diamond
    Inoue, T
    Yamaguchi, K
    Hosoi, Y
    Nakajima, K
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1997, 105 (11) : 970 - 975
  • [2] Essential causes for tool wear of single crystal diamond in ultra-precision cutting of ferrous metals
    Zou, Lai
    Yin, Jiachao
    Huang, Yun
    Zhou, Ming
    DIAMOND AND RELATED MATERIALS, 2018, 86 : 29 - 40
  • [3] Precision milling of tungsten carbide with micro PCD milling tool
    Zhongbo Zhan
    Ning He
    Liang Li
    Rabin Shrestha
    Jingyu Liu
    Shulong Wang
    The International Journal of Advanced Manufacturing Technology, 2015, 77 : 2095 - 2103
  • [4] Precision milling of tungsten carbide with micro PCD milling tool
    Zhan, Zhongbo
    He, Ning
    Li, Liang
    Shrestha, Rabin
    Liu, Jingyu
    Wang, Shulong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (9-12) : 2095 - 2103
  • [5] Effect of Lubricants on Precision Planing of Tungsten Carbide using Mono-Crystalline Diamond Tool
    Yui, Akinori
    Matsuoka, Hiroshi
    Okuyama, Shigeki
    Kitajima, Takayuki
    Okahata, Go
    ADVANCES IN ABRASIVE TECHNOLOGY XIV, 2011, 325 : 159 - 164
  • [6] INVESTIGATION ON THE CUTTING MODE AND BEHAVIOR OF SINGLE-CRYSTALLINE SILICON UNDER SINGLE-POINT DIAMOND CUTTING
    VAHDATI, M
    KISHI, K
    ICHIDA, Y
    INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1995, 29 (02): : 128 - 133
  • [7] Nanotwinned diamond cutting tool processed by femtosecond pulsed laser milling with trochoidal trajectory
    Jin, Tianye
    Chen, Junyun
    Zhao, Teng
    Zhao, Qingliang
    Tian, Yongjun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 294
  • [8] Application of machine learning algorithms for recognizing the wear of the cutting tool during precision milling of hardened tool steel
    Twardowski, Pawel
    Tabaszewski, Maciej
    Tabaszewski, Mateusz
    Czyzycki, Jakub
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2025, 19 (02) : 365 - 382
  • [9] The study of the influence of tool wear on cutting temperature in diamond ultra-precision cutting of aluminum alloy mirror
    Zhang Y.
    Dong G.
    Zhou M.
    1600, Trans Tech Publications Ltd (693): : 982 - 989
  • [10] Effect of oxygen doping on cutting performance of CVD diamond coated milling cutters in zirconia ceramics machining
    Gu, Yu
    Zhang, Erqing
    Wang, Jiachen
    Shen, Hongtao
    Lei, Xuelin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 124
12345