Inclusion morphology control of soft-killed deoxidation spring steel

被引：0

作者：

Qi, Jiang-Hua ^{[1
,2
]}

Wu, Chao ^{[1
]}

Luo, De-Xin ^{[1
]}

Yang, Chen-Wei ^{[1
,2
]}

Ou, Tie ^{[1
,2
]}

机构：

[1] Research Institute of Wuhan Iron and Steel (Group) Co.

[2] Engineering Laboratory for Metallurgy Process Simulation of Hubei Province

来源：

Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2014年 / 36卷 / SUPPL.1期

关键词：

Inclusion control; Plastification; Slag basicity; Spring steel;

D O I：

10.13374/j.issn1001-053x.2014.s1.032

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

With different slag basicity and refining process, the total oxygen content, inclusion size, and composition were analyzed, and the morphological distribution of inclusions was studied in the spring steel. The results show that, high basicity slag is propitious to inclusion size control, but high basicity also results in the fragile inclusion in steel, low basicity slag can also cause the relatively high oxygen content and large inclusion in steel. In order to ensure the plastic inclusions in spring steel, the slag basicity should be controlled in 1.0-1.3, and at the same time, the soft blowing time should be prolonged properly to ensure the removal of large inclusion and decrease the oxygen content in steel.

引用

页码：173 / 176

页数：3

共 7 条

[1]

Liu Y.Q., Wang L.J., Hu X.J., Et al., Comparison of processing techniques used in ultra-low oxygen spring steel production both domestic and abroad, J Iron Steel Res, 24, 12, (2012)

[2]

Shen Y., Shen B., Wu J., Et al., Technology development and production process situation of spring steel, Met Prod, 35, 3, (2009)

[3]

Zhou H.X., Wang Y., Wang X.H., Et al., A study on inclusion in ultra-low oxygen spring steel 60Si2Mn, Special Steel, 29, 2, (2008)

[4]

Qu W., Zheng S.B., Zhang Q.H., Et al., Effect of different deoxidation processes on inclusion in spring steel, Shanghai Metals, 32, 1, (2010)

[5]

Xue Z.L., Li Z.B., Zhang J.W., Et al., Thermodynamic conditions for oxide inclusion modification in spring steels, J Iron Steel Res, 12, 6, (2000)

[6]

Li H.B., Wang X.H., Zhang W., Et al., Control of non-metal inclusion in ultra-low oxygen spring steel, Steelmaking, 25, 5, (2008)

[7]

Wang X.H., Chen B., Jiang M., Et al., Effect of slag-metal reaction on formation of non-metallic inclusions of lower melting temperature in high strength alloyed structural steel, Iron Steel, 43, 12, (2008)

← 1 →