Determination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling Machine

被引：0

作者：

Budakçı, Mehmet ^{[1
]}

İlçe, Abdullah Cemil ^{[1
]}

Gürleyen, Tuğba ^{[2
]}

Utar, Mustafa ^{[3
]}

机构：

[1] Department of Wood Works Industrial Engineering, Faculty of Technology, Duzce University, Duzce,81620, Turkey

[2] Department of Furniture and Decoration, Vocational High School, Duzce University, Duzce,81100, Turkey

[3] Department of Furniture and Interior Design, Bunyan Technical Vocational High School, Kayseri,38600, Turkey

来源：

BioResources | 2013年 / 8卷 / 02期

关键词：

Cutting - Milling (machining) - Heat treatment - Timber - Stars;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The aim of the present study was to determine the surface roughness of heat-treated Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.), Uludağ fir (Abies bornmülleriana Mattf.), and sessile oak (Quercus petraea L.) wood material samples following planing by the cutters of a horizontal milling machine. The samples that were heat-treated at 140 °C or 160 °C for 3, 5, or 7 hours were then processed by star blades or razor blades, which are the most frequently used blade types in a milling machine. The surface roughness of the samples was determined by a touch (spined) scan device (TIME TR200), as indicated by the ISO 4287 principle. The results of the study indicate that heat treatment decreases the surface roughness value of the wood material and a significant difference in surface roughness cannot be detected between planing using the razor blade or the star blade. © 2013. All Rights Reserved.

引用

页码：3189 / 3199

共 50 条

[31] Weathering's Effect on Color and Roughness in Some Heat-treated Wood Species with Modified Water-based Varnish
Aytin, Ayhan
Cakicier, Nevzat
BIORESOURCES, 2022, 17 (04) : 6358 - 6376
[32] Surface Roughness and Wettability of Surface Densified Heat-Treated Norway Spruce (Picea abies L. Karst.)
Ayrilmis, Nadir
Kariz, Mirko
Kwon, Jin Heon
Kuzman, Manja Kitek
DRVNA INDUSTRIJA, 2019, 70 (04) : 377 - 382
[33] THE DETERMINATION OF MG SURFACE ENRICHMENT IN HEAT-TREATED ALMGSI ALLOYS USING THE SXES METHOD
KERTESZ, L
KOJNOK, J
SZASZ, A
ACTA PHYSICA ACADEMIAE SCIENTIARUM HUNGARICAE, 1980, 49 (1-3): : 169 - 174
[34] Determination of chemical changes in heat-treated wood using ATR-FTIR and FT Raman spectrometry
Ozgenc, Ozlem
Durmaz, Sefa
Boyaci, Ismail Hakki
Eksi-Kocak, Haslet
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY, 2017, 171 : 395 - 400
[35] EFFECTS OF DIFFERENT ADDITIVES IN WATERBORNE POLYACRYLATE COATING ON SELECTED SURFACE PROPERTIES OF HEAT-TREATED FINISHED WOOD
Nowrouzi, Zahra
Mohebby, Behbood
Ebrahimi, Morteza
Petric, Marko
DREWNO, 2021, 64 (208):
[36] Surface characterization of weathered and heat-treated wood-based composites reinforced by styrene maleic anhydride
Zor, Mustafa
Can, Ahmet
Gardner, Douglas J.
COLOR RESEARCH AND APPLICATION, 2019, 44 (06): : 1017 - 1023
[37] Thermal Modification Intensity of Heat-treated Poplar Wood Part 1: Characterization and Predication of Surface Layer
Li, Yang
Yao, Tao
Zhu, Yong
Liu, Shengquan
Shu, Zuju
Hasanagic, Redzo
Fathi, Leila
Chu, Demiao
DRVNA INDUSTRIJA, 2023, 74 (04) : 447 - 457
[38] DETERMINATION OF COEFFICIENTS IN THE ANALYTICAL SOLUTION OF COUPLED DIFFERENTIAL EQUATIONS OF HEAT AND MASS TRANSFER DURING CONVECTIVE DRYING OF HEAT-TREATED WOOD
Dedic, Aleksandar
JOURNAL OF POROUS MEDIA, 2012, 15 (01) : 75 - 82
[39] Surface Roughness of Heat Treated and Untreated Beech (Fagus sylvatica L.) Wood after Sanding
Gurau, Lidia
Irle, Mark
Buchner, Julia
BIORESOURCES, 2019, 14 (02): : 4512 - 4531
[40] Influence of wood surface chemistry on the tensile and flexural properties of heat-treated mangrove/high-density polyethylene composites
Adebayo, Ganiyat Olusola
Hassan, Aziz
Yahya, Rosiyah
Abd Rahman, Normasmira
Lafia-Araga, Ruth
POLYMER BULLETIN, 2019, 76 (12) : 6467 - 6486

← 1 2 3 4 5 →