Welding parameters-metallurgical properties correlation of friction welding of austenitic stainless steel and ferritic stainless steel

被引：6

作者：

Manideep, D. ^{[1
]}

Balachandar, K. ^{[1
]}

机构：

[1] School of Mechanical Engineering, SASTRA University

来源：

Journal of Applied Sciences | 2012年 / 12卷 / 10期

关键词：

Austenitic stainless steel (AISI 321); Ferritic stainless steel (AISI 430); Friction welding; Microstructure; Taguchi's approach; Vickers hardness test;

D O I：

10.3923/jas.2012.1013.1019

中图分类号：

学科分类号：

摘要：

Continuous drive friction welding studies on austenitic-ferritic stainless steel combination has been attempted in this investigation. The present study of austenitic stainless steel AISI 321 and ferritic stainless steel AISI 430 is conducted with various combinations of process parameters. Parameter optimization, microstructure and mechanical property correlation are the major contribution of the study. The welded joints were produced by varying friction pressure (F p), upset pressure (U p) and burn-off length (B), considering upset time (U t) and speed (N) constants. Design of experiments was done using Taguchi approach of orthogonal array. Metallurgical properties of the welds are examined using optical microscopy and mechanical behavior of the welded interface was examined with Vickers hardness test. Deformation was confined to ferritic stainless steel and the affect of upset pressure, friction pressure on grain size and micro-hardness were studied. © 2012 Asian Network for Scientific Information.

引用

页码：1013 / 1019

页数：6

共 15 条

[11]

Sathiya P., Aravindan S., Noorul Haq A., Effect of friction welding parameters on mechanical and metallurgical properties of ferritic stainless steel, Int. J. Adv. Manuf. Technol., 31, pp. 1076-1082, (2007)

[12]

Satyanarayana V.V., Reddy G.M., Mohandas T., Dissimilar metal friction welding of austenitic-ferritic stainless steels, J. Mater. Process. Technol., 160, pp. 128-137, (2005)

[13]

Shinoda T., Miyahara K., Ogawa M., Endo S., Friction welding of aluminium and plain low carbon steel, Welding Int., 15, pp. 435-445, (2001)

[14]

Vairis A., Petousis M., Designing experiments to study welding processes: Using taguchi method, J. Eng. Sci. Technol. Rev., 2, pp. 99-103, (2009)

[15]

Yilbas B.S., Sahin A.Z., Kahraman N., Al-Garni A.Z., Friction welding of St-Al and Al-Cu materials, J. Mater. Process. Technol., 49, pp. 431-443, (1995)

← 1 2 →