Experimental study on mechanical properties of flexible pneumatic bending joint

被引：0

作者：

Shao, Tiefeng ^{[1
,2
]}

Zhang, Libin ^{[1
]}

Dou, Mingyu ^{[1
]}

Bao, Guanjun ^{[1
]}

Luo, Xinyuan ^{[1
]}

Yang, Qinghua ^{[1
]}

机构：

[1] Key Laboratory of E and M, Ministry of Education and Zhejiang Province, Zhejiang University of Technology, Hangzhou

[2] Engineering Training Center, China Jiliang University, Hangzhou

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2014年 / 45卷 / 11期

关键词：

Empirical model; Flexible pneumatic bending joint; Mechanical characteristics; Surface fitting;

D O I：

10.6041/j.issn.1000-1298.2014.11.052

中图分类号：

学科分类号：

摘要：

A new type of flexible pneumatic bending joint (FPBJ) and its mathematical model were proposed. To implement its real-time closed-loop control system, its mathematical model was simplified, and the mechanical characteristics were studied experimentally. An experimental platform for mechanical characteristics testing was set up, and two FPBJs with different length (40 mm and 60 mm) were tested. The experimental results were analyzed with Matlab curve and surface fitting toolbox, and the FPBJ empirical model was derived. The model showed a non-linear relationship among the bending angle, the FPBJs internal and external pressure difference, joint length and the output force of the FPBJs. Contrast to the simplified mathematical model, the empirical model was more precise, the mean relative error of output angle model was less than 6.7%, and the mean relative error of output force model was less than 2%. Meanwhile, an error, the joint length is proportional to the bending angle in the mathematical model, was avoided in the empirical model.

引用

页码：337 / 342and323

共 19 条

[11]

Chou C.P., Hannaford B., Measurement and modeling of McKibben pneumatic artificial muscles, IEEE Transactions on Robotics and Automation, 12, 1, pp. 90-102, (1996)

[12]

Zong G., Grasping force control of rubber muscle system using VSS theory, Journal of Beijing University of Aeronautics and Astronautics, 2, pp. 111-116, (1990)

[13]

Liu R., Zong G., Study on actuating characteristics of rubbertuator, Chinese High Technology Letters, 6, pp. 34-38, (1998)

[14]

Tian D., Lin L., Static characteristics and measurements of artificial muscles, Practical Measurement Technology, 24, 6, pp. 12-14, (1998)

[15]

Wang Z., Sui L., Bao G., Research on input shaping for the joint actuated by pneumatic muscles, Chinese Journal of Mechanical Engineering, 41, 1, pp. 66-70, (2005)

[16]

Tao G., Xie J., Zhou H., Research achievements and development trends of pneumatic artificial muscles, Journal of Mechanical Engineering, 45, 10, pp. 75-83, (2009)

[17]

Peng G., Yu L., Liu H., Structural design of a dexterous hand actuated by pneumatic artificial muscle, Transactions of Beijing Institution of Technology, 26, 7, pp. 593-597, (2006)

[18]

Bao G., Wang Z., Yang Q., Et al., Dynamic characteristics of flexible pneumatic torsion joint, Transactions of the Chinese Society for Agricultural Machinery, 41, 6, pp. 204-207, (2010)

[19]

Luo X., Research on the characteristics of large flexible dexterous finger, (2012)

← 1 2 →