Analysis on corrosion resistance of the cast manganese steel by shock excitation and rotation method

被引:0
作者
机构
[1] School of Mechanical Electronic and Information Engineering, Huangshan University
[2] College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics
来源
| 1600年 / Trans Tech Publications Ltd卷 / 568期
关键词
Corrosion resistance; Corrosion weightlessness; Manganese steel; Mine hammer; Shock excitation and rotation method;
D O I
10.4028/www.scientific.net/KEM.568.9
中图分类号
学科分类号
摘要
The corrosion property of the cast manganese steel by shock excitation and rotation method was done by the corrosion experiment. The experiment showed the corrosion resistance of the cast manganese steel by shock excitation and rotation method was better than that of the cast manganese steel by traditional casting technology. In addition, the experiment results showed that corrosion weightlessness was increased with the time increasing. In twenty-four hours, the corrosion of the casting manganese steel could not very serious with the time increasing, but exceeding twenty-four hours, the corrosion degree of the casting manganese steel would increase with the time increasing. © (2013) Trans Tech Publications, Switzerland.
引用
收藏
页码:9 / 13
页数:4
相关论文
共 50 条
  • [31] A comparative study of microstructure and corrosion resistance in DP980 steel joints under different laser welding method
    Liu, Shengli
    Li, Taotao
    Li, Ruifeng
    Qi, Kai
    Liu, Zhenguang
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 3870 - 3880
  • [32] Investigation of effective parameters in improving corrosion resistance of silica coated stainless steel via sol-gel method
    Ghaffari, M.
    Barzegar, A.
    Janghorban, K.
    Javidi, M.
    [J]. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2011, 46 (05) : 605 - 610
  • [33] Influence of Build Angle and Polishing Roughness on Corrosion Resistance of 316L Stainless Steel Fabricated by SLM Method
    Wang, Hao
    Shu, Xiaoyong
    Zhao, Jianping
    [J]. MATERIALS, 2022, 15 (11)
  • [34] TEM analysis and corrosion resistance of the ceramic coatings on Q235 steel prepared by hybrid method of hot-dipping aluminum and plasma electrolytic oxidation
    Lu Lihong
    Shen Dejiu
    Zhang Jingwu
    Guo Changhong
    [J]. MECHANICAL ENGINEERING AND MATERIALS, PTS 1-3, 2012, 152-154 : 40 - +
  • [35] Corrosion Resistance Analysis of Sintered NdFeB Magnets Using Ultrasonic-Aided EDM Method
    L. Li
    X. T. Wei
    Z. Y. Li
    X. Cheng
    [J]. Journal of Materials Engineering and Performance, 2015, 24 : 536 - 542
  • [36] Corrosion Resistance Analysis of Sintered NdFeB Magnets Using Ultrasonic-Aided EDM Method
    Li, L.
    Wei, X. T.
    Li, Z. Y.
    Cheng, X.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (01) : 536 - 542
  • [37] Analysis of Corrosion Resistance of Laser Clad Hastelloy C276 Coatings of AerMet100 Steel
    Cui, J.
    Su, C. W.
    Yang, G. F.
    [J]. LASERS IN ENGINEERING, 2023, 55 (3-6) : 293 - 314
  • [38] Comparative analysis of microstructure and corrosion resistance in laser-clad austenitic and martensitic stainless-steel coatings
    Wei, Runze
    Deng, Rui
    Li, Huan
    Liang, Jianguo
    Zhao, Chunjiang
    Ouyang, Changyao
    Bai, Qiaofeng
    [J]. VACUUM, 2024, 229
  • [39] Application of statistical analysis to evaluate the corrosion resistance of steel rebars embedded in concrete with marble and granite waste dust
    Taji, Iman
    Ghorbani, Saeid
    de Brito, Jorge
    Tam, Vivian W. Y.
    Sharifi, Sohrab
    Davoodi, Ali
    Tavakkolizadeh, Mohammadreza
    [J]. JOURNAL OF CLEANER PRODUCTION, 2019, 210 : 837 - 846
  • [40] Influence of Heat Treatment on Corrosion Resistance of Sn/Mg Films Formed by PVD Method on Hot-Dip Galvanized Steel
    Hwang, Sung-Hwa
    Lee, Seung-Hyo
    Lee, Myeong-Hoon
    [J]. COATINGS, 2023, 13 (01)