Modelling using finite element analysis of stress and strain in gas metal arc welding on 5052 H32 aluminium alloy

被引：0

作者：

Morejón J.A.P. ^{[1
]}

Morales F.R. ^{[1
]}

Rodríguez Y.G. ^{[1
]}

Crespo A.C. ^{[1
]}

Cedré E.D. ^{[1
]}

Scott A.D. ^{[1
]}

机构：

[1] Centre for Welding Investigations, Universidad Central Marta Abreu de Las Villas, Santa Clara, Villa Clara

来源：

Welding International | 2010年 / 24卷 / 07期

关键词：

Aluminium; Gmaw; Modelling; Strains; Stress; Welding;

D O I：

10.1080/09507110902844600

中图分类号：

学科分类号：

摘要：

The 5XXX series of non-heat-treatable aluminium alloys, widely used in modern industry, have the peculiarity that an area near the welding bead, which reaches a temperature higher than 2308C, suffers an annealing effect that causes a considerable decrease in yield strength. The present paper deals with the three-dimensional modelling, using general-use finite element software, of a classic experiment conducted in the past by Masubushi, using the GMAW process on aluminium alloy 5052 H32, in order to determine the thermal history, and transient and residual strain and stress. Finally, a method for modelling applicable to this material type is proposed, where the model is divided into three zones; one near the weld with the properties of aluminium in annealed state, another further away with the base metal properties, and a transitional zone with intermediate properties. © 2010 Taylor & Francis.

引用

页码：509 / 517

页数：8

共 17 条

[1]

Welding Handbook-welding Science and Technology, 1, (2001)

[2]

Hibbitt H.D., Marcal P.V., A numerical thermo-mechanical model of the welding and subsequent loading of a fabricated structure, Comput Struct, 3, 11, pp. 45-74, (1974)

[3]

Zhu X.K., Chao Y.J., Effects of temperature-dependent material properties on welding simulation, Comput Struct, 80, pp. 967-976, (2002)

[4]

Francis J.D., Welding Simulations of Aluminum Alloy Joints By Finite Element Analysis, (2002)

[5]

Ramos Morales F., Duffus Scott A., Rodriguez Perez M., Diaz cedre E., Pozo Morejon J., Miguel Oria J.V., Finite element model for determining the temperature field in a fillet weld, Modelo de elementos finitos para determinar el campo de temperatura en una costura de filete, pp. 33-42, (2007)

[6]

Yajihan L., Wang J., Finite Element Analysis of Residual Stress In the Weld Zone of A High Strength Steel. Key Laboratory of Liquid Structural and Heredity of Materials

[7]

Bezerra A.C., Simulação Numérica Da Soldagem Com Aplicação À Caracterização Do Comportamento Dinâmico De Estruturas Soldadas, (2006)

[8]

Yu H., Shouju L., Yingxi L., Finite element simulation for residual stresses in welding process, Eng Mater, 353-358, pp. 1915-1918, (2007)

[9]

Masubushi K., Analysis of welded structures, Residual Stress, Distortion and Their Consequences, (1980)

[10]

Incropera F.P., de Witt D.P., Fundamentals of Heat and Mass Transfer, (1990)

← 1 2 →