Compatibilization of PP/PE blends and scraps with royalene: Mechanical properties, SAXS, and WAXS

被引：0
|
作者：
Nedkov, T. [1 ]
Lednický, F. [1 ]
Mihailova, M. [1 ]
机构：
[1] Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, v. v. i., 162 06 Prague 6, Czech Republic
来源：
Journal of Applied Polymer Science | 2008年 / 109卷 / 01期
关键词：
PP/PE 93/7 model virgin blends and recycled scraps were compatibilized with Royalene (EPDM/PE 65/35 blend) and mechanically tested. No differences in impact and tensile properties between them were found. However; the tensile-impact strength increased almost twice with 10%-compatibilized sample in comparison with uncompatibilized ones. The yield stress of blends containing 10% Royalene decreased to 75-80% of the original value. This effect is in agreement with microhardness measurements; the increase in the compatibilizer content causes softening of the blend. The elongation at break and elongation at yield do not depend on the compatibilizer concentration. The compatibilizer does not influence the degree of crystallinity (WAXS data) of the blends either. Vickers microhardness is in good agreement with Tabor's relationship. The differences between long periods of HDPE in Royalene and LDPE in PP/PE blends (SAXS) proved PE/EPDM interaction. The interaction plays a key role in the toughening of PP/PE blends. © 2008 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：226 / 233
相关论文
共 50 条
  • [41] Mechanical properties of polypropylene polyamide 6 blends: Effect of manufacturing processes and compatibilization
    Yoon, BS
    Joang, JY
    Suh, MH
    Lee, YM
    Lee, SH
    POLYMER COMPOSITES, 1997, 18 (06) : 757 - 764
  • [42] Mechanical properties of polypropylene/polyamide 6 blends: Effect of manufacturing processes and compatibilization
    Yoon, Byung Seon
    Joang, Joon Young
    Suh, Moon Ho
    Lee, Yong Mu
    Lee, Suck Hyun
    Polymer Composites, 1997, 18 (06): : 757 - 764
  • [43] Dynamic mechanical properties of polypropylene-polyamide blends. Effect of compatibilization
    Liang, Zhizhong, 1600, (44):
  • [44] BLENDS OF ISOTACTIC POLYPROPYLENE AND NITRILE RUBBER - MORPHOLOGY, MECHANICAL-PROPERTIES AND COMPATIBILIZATION
    GEORGE, S
    JOSEPH, R
    THOMAS, S
    VARUGHESE, KT
    POLYMER, 1995, 36 (23) : 4405 - 4416
  • [45] EFFECT OF ETHYLENE-PROPYLENE COPOLYMER WITH RESIDUAL PE CRYSTALLINITY ON MECHANICAL-PROPERTIES AND MORPHOLOGY OF PP/HDPE BLENDS
    ZHU, W
    ZHANG, XQ
    FENG, ZL
    HUANG, BT
    JOURNAL OF APPLIED POLYMER SCIENCE, 1995, 58 (03) : 551 - 557
  • [46] Reactive compatibilization of PE/PS blends.: Effect of copolymer chain length on interfacial adhesion and mechanical behavior
    Diaz, Monica F.
    Barbosa, Silvia E.
    Capiati, Numa J.
    POLYMER, 2007, 48 (04) : 1058 - 1065
  • [47] Fracture behavior and environmental stress cracking resistance (ESCR) of HIPS/PE blends and the effect of compatibilization on their properties
    Khodabandelou, M.
    Aghjeh, M. K. Razavi
    Rezaei, M.
    ENGINEERING FRACTURE MECHANICS, 2009, 76 (18) : 2856 - 2867
  • [48] Study of the Effect of Recycled PP on the Mechanical and Flow Properties of PP/ERDM Blends
    Santos, Luciene da S.
    da Silva, Antonio H. Monteiro da F. T.
    Pacheco, Elen B. A. V.
    da Silva, Ana L. N.
    POLIMEROS-CIENCIA E TECNOLOGIA, 2013, 23 (03): : 389 - 394
  • [49] Study of the effect of recycled PP on the mechanical and flow properties of PP/ERDM blends
    Estudo do Efeito da Adição de PP Reciclado nas Propriedades Mecânicas e de Escoamento de Misturas de PP/EPDM
    Pacheco, E.B.A.V. (elen@ima.ufrj.br), 1600, Associacao Brasileira de Polimeros (23):
  • [50] Effect of composition and phase inversion in PET/PE-LD and PET/PP blends on their mechanical and rheological properties and morphological structure
    Janik, J
    Królikowski, W
    POLIMERY, 2002, 47 (04) : 250 - 255
12345