Investigating 4D respiratory cone-beam CT imaging for thoracic interventions on robotic C-arm systems: a deformable phantom study

被引:0
作者
Reynolds, Tess [1 ]
Dillon, Owen [1 ]
Ma, Yiqun [2 ]
Hindley, Nicholas [1 ]
Stayman, J. Webster [2 ]
Bazalova-Carter, Magdalena [3 ]
机构
[1] Univ Sydney, Sydney, NSW, Australia
[2] Johns Hopkins Univ, Baltimore, MD USA
[3] Univ Victoria, Victoria, BC, Canada
关键词
Cone-beam CT; Respiratory; 4DCBCT; Interventional imaging; COMPUTED-TOMOGRAPHY; NAVIGATION; BRONCHOSCOPY; FIELD;
D O I
10.1007/s13246-024-01491-0
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Increasingly, interventional thoracic workflows utilize cone-beam CT (CBCT) to improve navigational and diagnostic yield. Here, we investigate the feasibility of implementing free-breathing 4D respiratory CBCT for motion mitigated imaging in patients unable to perform a breath-hold or without suspending mechanical ventilation during thoracic interventions. Circular 4D respiratory CBCT imaging trajectories were implemented on a clinical robotic CBCT system using additional real-time control hardware. The circular trajectories consisted of 1 x 360 degrees circle at 0 degrees tilt with fixed gantry velocities of 2 degrees/s, 10 degrees/s, and 20 degrees/s. The imaging target was an in-house developed anthropomorphic breathing thorax phantom with deformable lungs and 3D-printed imaging targets. The phantom was programmed to reproduce 3 patient-measured breathing traces. Following image acquisition, projections were retrospectively binned into ten respiratory phases and reconstructed using filtered back projection, model-based, and iterative motion compensated algorithms. A conventional circular acquisition on the system of the free-breathing phantom was used as comparator. Edge Response Width (ERW) of the imaging target boundaries and Contrast-to-Noise Ratio (CNR) were used for image quality quantification. All acquisitions across all traces considered displayed visual evidence of motion blurring, and this was reflected in the quantitative measurements. Additionally, all the 4D respiratory acquisitions displayed a lower contrast compared to the conventional acquisitions for all three traces considered. Overall, the current implementation of 4D respiratory CBCT explored in this study with various gantry velocities combined with motion compensated algorithms improved image sharpness for the slower gantry rotations considered (2 degrees/s and 10 degrees/s) compared to conventional acquisitions over a variety of patient traces.
引用
收藏
页码:1751 / 1762
页数:12
相关论文
共 32 条
  • [21] 4D cone-beam CT imaging for guidance in radiation therapy: setup verification by use of implanted fiducial markers
    Jin, Peng
    van Wieringen, Niek
    Hulshof, Maarten C. C. M.
    Bel, Arjan
    Alderliesten, Tanja
    MEDICAL IMAGING 2016: IMAGE-GUIDED PROCEDURES, ROBOTIC INTERVENTIONS, AND MODELING, 2016, 9786
  • [22] Integration of free-hand 3D ultrasound and mobile C-arm cone-beam CT: Feasibility and characterization for real-time guidance of needle insertione
    Marinetto, E.
    Uneri, A.
    De Silva, T.
    Reaungamornrat, S.
    Zbijewski, W.
    Sisniega, A.
    Vogt, S.
    Kleinszig, G.
    Pascau, J.
    Siewerdsen, J. H.
    COMPUTERIZED MEDICAL IMAGING AND GRAPHICS, 2017, 58 : 13 - 22
  • [23] Multidimensional Noise Reduction in C-arm Cone-beam CT via 2D-based Landweber Iteration and 3D-based Deep Neural Networks
    Choi, Dahim
    Kim, Juhee
    Chae, Seung-Hoon
    Kim, Byeongjoon
    Baek, Jongduk
    Maier, Andreas
    Fahrig, Rebecca
    Park, Hyun-Seok
    Choi, Jang-Hwan
    MEDICAL IMAGING 2019: PHYSICS OF MEDICAL IMAGING, 2019, 10948
  • [24] Digital reconstruction of high-quality daily 4D cone-beam CT images using prior knowledge of anatomy and respiratory motion
    Zhang, Yongbin
    Yang, Jinzhong
    Zhang, Lifei
    Court, Laurence E.
    Gao, Song
    Balter, Peter A.
    Dong, Lei
    COMPUTERIZED MEDICAL IMAGING AND GRAPHICS, 2015, 40 : 30 - 38
  • [25] Integration of 2D iteration and a 3D CNN-based model for multi-type artifact suppression in C-arm cone-beam CT
    Choi, Dahim
    Kim, Wonjin
    Lee, Jiyeon
    Han, Mina
    Baek, Jongduk
    Choi, Jang-Hwan
    MACHINE VISION AND APPLICATIONS, 2021, 32 (06)
  • [26] Clinical applications of the C-arm cone-beam CT-based 3D needle guidance system in performing percutaneous transthoracic needle biopsy of pulmonary lesions
    Jiao, De-Chao
    Li, Teng-Fei
    Han, Xin-Wei
    Wu, Gang
    Ma, Ji
    Fu, Ming-Ti
    Sun, Qi
    Beilner, Janina
    DIAGNOSTIC AND INTERVENTIONAL RADIOLOGY, 2014, 20 (06) : 470 - 474
  • [27] A novel technique of cervical pedicle screw placement with a pilot screw under the guidance of intraoperative 3D imaging from C-arm cone-beam CT without navigation for safe and accurate insertion
    Takahata, Masahiko
    Yamada, Katsuhisa
    Akira, Iwata
    Endo, Tsutomu
    Sudo, Hideki
    Yokoyama, Hidetoki
    Iwasaki, Norimasa
    EUROPEAN SPINE JOURNAL, 2018, 27 (11) : 2754 - 2762
  • [28] A novel technique of cervical pedicle screw placement with a pilot screw under the guidance of intraoperative 3D imaging from C-arm cone-beam CT without navigation for safe and accurate insertion
    Masahiko Takahata
    Katsuhisa Yamada
    Iwata Akira
    Tsutomu Endo
    Hideki Sudo
    Hidetoki Yokoyama
    Norimasa Iwasaki
    European Spine Journal, 2018, 27 : 2754 - 2762
  • [29] Evaluation of three-dimensional iterative image reconstruction in C-arm-based interventional cone-beam CT A phantom study in comparison with customary reconstruction technique
    Suzuki, Shigeru
    Katada, Yoshiaki
    Takayanagi, Tomoko
    Sugawara, Haruto
    Ishikawa, Takuya
    Yamamoto, Yuzo
    Wada, Hiroo
    MEDICINE, 2019, 98 (13)
  • [30] High-Accuracy 3D Image-Based Registration of Endoscopic Video to C-Arm Cone-Beam CT for Image-Guided Skull Base Surgery
    Mirota, Daniel J.
    Uneri, Ali
    Schafer, Sebastian
    Nithiananthan, Sajendra
    Reh, Douglas D.
    Gallia, Gary L.
    Taylor, Russell H.
    Hager, Gregory D.
    Siewerdsen, Jeffrey H.
    MEDICAL IMAGING 2011: VISUALIZATION, IMAGE-GUIDED PROCEDURES, AND MODELING, 2011, 7964