Influence of thrust fins with different installation angles on open water performance of podded propulsor

被引:0
|
作者
Guo, Chunyu [1 ]
Sun, Yu [1 ]
Zhao, Dagang [1 ]
Wu, Tiecheng [1 ]
机构
[1] College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
关键词
Ship propulsion - Fins (heat exchange) - Hydrodynamics;
D O I
暂无
中图分类号
学科分类号
摘要
The hydrodynamic performance of podded propulsors was simulated by means of computational fluid dynamics (CFD). The MRF model was used to simulate the average effect of interaction. The thrust coefficient, torque coefficient, open water efficiency and lateral force as a function of advance coefficient were calculated, and the open water performance curves were obtained. The podded propulsors with thrust fins was proposed. The hydrodynamic performance of podded propulsors with thrust fins at different installation angles (0°, ±2°, ±4°) was calculated, then the result was compared with the performance of normal one, meanwhile the thrusts of propulsion systems were analyzed. In the end, by observing the pressure distribution of strut with pod and induced velocity before the thrust fins, the influence of thrust fins on the podded propulsor was analyzed. The results shows that the hydrodynamic performance of podded propulsors is improved after installation of thrust fins, and appropriate change of the installation angle of thrust fins makes the improvement more obvious. At the same time, the lateral force of propulsor is optimized, and the directional stability of ship is improved.
引用
收藏
页码:106 / 111
相关论文
共 50 条
  • [31] Influence of bearings on the open water performance of a rim-driven thruster
    Liu, Bao
    Dai, Mingcheng
    Liang, Xingxin
    PHYSICS OF FLUIDS, 2023, 35 (08)
  • [32] Grid influence on the Propeller Open-Water Performance and Flow Field
    Berchiche, Nabila
    Janson, Carl-Erik
    SHIP TECHNOLOGY RESEARCH, 2008, 55 (02) : 87 - +
  • [33] The Influence of Different Ions on the Performance of Low Salinity Water Flooding
    Boroomand, Mohammad Reza
    Mosayebi, Amir
    IRANIAN JOURNAL OF CHEMISTRY & CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION, 2023, 42 (12): : 4327 - 4338
  • [34] Influence of different calcined clays to the water transport performance of concretes
    Tironi, Alejandra
    Sposito, Ricarda
    Cordoba, Gisela P.
    Zito, Silvina, V
    Rahhal, Viviana F.
    Thienel, Karl-Christian
    Irassar, Edgardo F.
    MAGAZINE OF CONCRETE RESEARCH, 2022, 74 (14) : 702 - 714
  • [35] Influence of water with different salinity on the adsorption performance of coal reservoir
    Wei, Yingchun
    Xiang, Xinxuan
    Wang, Anmin
    Zhang, Qiang
    Cao, Daiyong
    Meitan Xuebao/Journal of the China Coal Society, 2019, 44 (09): : 2833 - 2839
  • [36] Influence of Groove Molded Lines on the lubrication performance of Water-lubricated Spiral Groove Thrust Bearings
    Liu Xiaoyan
    Liu Xianwei
    MANUFACTURING PROCESS AND EQUIPMENT, PTS 1-4, 2013, 694-697 : 538 - +
  • [37] Influence of Different Air Inlet Configurations of a Paraglider's Open Airfoil Performance
    Abdelqodus, Amir A.
    Kursakov, Innokentiy A.
    INTERNATIONAL CONFERENCE ON THE METHODS OF AEROPHYSICAL RESEARCH (ICMAR 2018), 2018, 2027
  • [38] Comparative studies on thermal performance of water-in-glass evacuated tube solar water heaters with different collector tilt-angles
    Tang, Runsheng
    Yang, Yuqin
    Gao, Wenfeng
    SOLAR ENERGY, 2011, 85 (07) : 1381 - 1389
  • [39] Investigations on the Influence of Small Impact Angles for Abrasive Water Injector Jet Cutting of High-Performance Workpieces
    Reder, Waldemar
    Uhlmann, Eckart
    ADVANCES IN WATER JETTING II, WATER JET 2023, 2025, : 169 - 181
  • [40] INFLUENCE OF DIFFERENT IMPELLER DIAMETER ON CAVITATION PERFORMANCE IN AN ENGINE COOLING WATER PUMP
    Li, Wei
    Li, Weiqiang
    Shi, Weidong
    Zhou, Ling
    Pei, Bing
    PROCEEDINGS OF THE ASME/JSME/KSME JOINT FLUIDS ENGINEERING CONFERENCE, 2015, VOL 1A, SYMPOSIA, PT 2, 2016,