Exergy analysis on gas production from biomass gasification

被引：0
作者：
机构：
[1] School of Energy and Power Engineering, Jiangsu University
来源：
Wang, L. (thulq2000@163.com) | 1600年 / Chinese Society of Agricultural Machinery卷 / 44期
关键词：
Biomass; Exergy analysis; Gas; Gasification;
D O I：
10.6041/j.issn.1000-1298.2013.S1.026
中图分类号：
学科分类号：
摘要：
Biomass gasification was performed on a fluidized bed reactor with steam as gasifying agent. Two-stage gasification processes in a fluidized bed were adopted. This research aimed to determine the effects of reaction temperature and steam-to-biomass ratio (u) on exergy distribution, chemical exergy, physical exergy and exergy efficiency of the product gas, and residual ratio and exergy efficiency of the unreacted carbon, etc. Over the ranges of the test conditions used, chemical exergy varied from 10832.13 kJ/kg to 16510.54 kJ/kg, physical exergy ranged between 685.05 kJ/kg and 1 146.71 kJ/kg chemical exergy/physical exergy ratio varied from 13.5 to 17.7, and exergy efficiency of product gas ranged between 35.52% and 60.78%. The results showed that the top two contributions of gas component to exergy value were H2 and CO. With the increase of reaction temperature, chemical exergy, physical exergy and exergy efficiency of the product gas increased, whilst chemical exergy/physical exergy ratio, and residual ratio and exergy efficiency of the unreacted carbon decreased correspondingly. The exergy value and efficiency of the product gas first increased and then decreased with the increase in u. An optimal value of u should be chosen between 1.2 and 1.6.
引用
收藏
页码：143 / 148
页数：5
相关论文
共 17 条
  • [1] Gonzalez J.F., Roman S., Bragado D., Et al., Investigation on the reactions influencing biomass air and air/steam gasification for hydrogen production, Fuel Processing Technology, 89, 8, pp. 764-772, (2008)
  • [2] Zhang R.Q., Cummer K., Suby A., Et al., Biomass-derived hydrogen from an air-blown gasifier, Fuel Processing Technology, 86, 8, pp. 861-874, (2005)
  • [3] Mun T.Y., Seon P.G., Kim J.S., Production of a producer gas from woody waste via air gasification using activated carbon and a two-stage gasifier and characterization of tar, Fuel, 89, 11, pp. 3226-3234, (2010)
  • [4] Rapagna S., Jand N., Kiennemann A., Et al., Steam-gasification of biomass in a fluidized-bed of olivine particles, Biomass and Bioenergy, 19, 3, pp. 187-197, (2000)
  • [5] Moghtaderi B., Effects of controlling parameters on production of hydrogen by catalytic steam gasification of biomass at low temperatures, Fuel, 86, 15, pp. 2422-2430, (2007)
  • [6] Lu P.M., Chang J., Xiong Z.H., Et al., Biomass air-steam gasification in a fluidized bed to produce hydrogen-rich gas, Energy Fuels, 17, 13, pp. 677-682, (2003)
  • [7] Lu P.M., Xiong Z.H., Chang J., Et al., An experimental study on biomass air-steam gasification in a fluidized bed, Bioresource Technology, 95, 1, pp. 95-101, (2004)
  • [8] Kumar A., Eskridge K., Jones D.D., Et al., Steam-air fluidized bed gasification of distillers grains: Effects of steam to biomass ratio, equivalence ratio and gasification temperature, Bioresource Technology, 100, 6, pp. 2062-2068, (2009)
  • [9] Alauddin Z.A.B.Z., Lahijani P., Mohammadi M., Et al., Gasification of lignocellulosic biomass in fluidized beds for renewable energy development: A review, Renewable and Sustainable Energy Reviews, 14, 9, pp. 2852-2862, (2010)
  • [10] Hobbs M.L., Radulovic P.T., Smoot L.D., Combustion and gasification of coals in fixed-beds, Progress in Energy and Combustion Science, 19, 6, pp. 505-586, (1993)
12