Experimental investigations on delamination to improve the hole quality in Chopped Strand Mat GFRP material during drilling operation

被引：0

作者：

Panneerselvam, T. ^{[1
]}

Raghuraman, S. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, Thanjavur-613 401, Tamil Nadu

来源：

Journal of Applied Sciences | 2012年 / 12卷 / 10期

关键词：

Analysis of variance; CSMat GFRP; Delamination; Drilling; Ohogonal design; Signal to noise ratio;

D O I：

10.3923/jas.2012.1063.1066

中图分类号：

学科分类号：

摘要：

Fiber Reinforced Composite materials have an increased applications in recent days due to its enhanced structural properties and in turn mechanical and thermal properties. The heterogeneous nature of this kind of material makes complications in machining operation. However, drilling is a common machining practice for assembly of components. The quality of holes produced in Chopped Strand Mat Glass Fiber Reinforced Plastic (CSMat GFRP) material is severely affected by internal delamination besides with entry and exit delamination. The objective of the study was to apply the Taguchi methods to achieve an improved hole quality considering minimum delamination through proper selection of drilling parameters. A plan of experiments based on orthogonal main effect design has been used to get data for analysis. The signal to noise ratio and the analysis of variance are employed to investigate the drilling characteristics of CSMat GFRP material using high speed steel drills. © 2012 Asian Network for Scientific Information.

引用

页码：1063 / 1066

页数：3

共 15 条

[1]

Arul S., Vijayaraghavan L., Malhotra S.K., Krishnamurthy R., The effect of vibratory drilling on hole quality in polymeric composites, Int. J. Mach. Tools Manuf., 46, pp. 252-259, (2006)

[2]

Bhatnagar N., Singh I., Nayak D., Damage investigation in drilling of glass fiber reinforced plastic composite laminates, Mater. Manuf. Processes, 19, pp. 995-1007, (2004)

[3]

Caprino G., Tagliaferri V., Damage development in drilling glass fiber reinforced plastics, Int. J. Mach. Tools Manuf., 35, pp. 817-829, (1995)

[4]

Chen W., Some experimental investigations in the drilling of Carbon Fiber-Reinforced Plastics (CFRP) composite laminates, Int. J. Mach. Tools Manuf., 38, pp. 1097-1108, (1997)

[5]

Davim J.P., Reis P., Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments, Composite Structures, 59, pp. 481-487, (2003)

[6]

Davim J.P., Reis P., Conceicao C., Antonio, experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up, Int. J. Compos. Sci. Technol., 64, pp. 289-297, (2004)

[7]

Enemuoh E.U., Ei-Gizawy Sherif A., Chuwujekwu Okafor A., An approach for development of damage-free drilling of carbon fiber reinforced thermosets, Int. J. Mach. Tools Manuf., 41, pp. 1795-1814, (2004)

[8]

Hocheng H., Tsao C.C., Effects of special drill bits on drilling-induced delamination of composite materials, Int. J. Mach. Tools Manuf., 46, pp. 1403-1416, (2006)

[9]

Hocheng H., Puw H., On drilling characteristics of fiber-reinforced thermoset and thermoplastics, Int. J. Mach. Tools Manuf., 32, pp. 583-592, (1992)

[10]

Khashaba U.A., Delamination in drilling GFR-thermoset composites, Composite Structure, 63, pp. 313-327, (2004)

← 1 2 →