Laser remelting of silicide coatings on Mo and TZM alloy

被引：16
作者：
Moskal, Grzegorz [1 ]
Grabowski, Andrzej [2 ]
Lisiecki, Aleksander [3 ]
机构：
[1] Silesian University of Technology, Inst. of Mat. Science, Krasińskiego 8, Katowice
[2] Silesian University of Technology, Inst. of Physics, Krzywoustego 2, Gliwice
[3] Silesian University of Technology, Dept. of Welding, Konarskiego 18, Gliwice
来源：
Solid State Phenomena | 2015年 / 226卷
关键词：
Laser remelting; Molybdenum; Silicide coatings; TZM;
D O I：
10.4028/www.scientific.net/SSP.226.121
中图分类号：
学科分类号：
摘要：
Characterization of top surface and microstructure of silicide coatings obtained during diffusion process of pack cementation type and laser remelting treatments is showed in this article. The basic materials were pure Mo sheet and TZM molybdenum alloy. The coatings were deposited in powder process and glazed by different types of lasers. In first step the phase compositions of coatings analyzed by XRD in initial condition and after remelting process. The morphology of the coatings top surface was described as well. All types of coatings were characterized by network of cracks on top surface of the coatings. Laser treatment of the silicide top surface changed morphology of the top surface, especially their cracks network. LM and SEM analysis revealed that internal coatings morphology was very similar in all cases. © (2015) Trans Tech Publications, Switzerland
引用
收藏
页码：121 / 126
页数：5
相关论文
共 18 条
  • [1] Intermetallic Compounds 1, Principles, John Wiley & Sons, pp. 977-1013, (1994)
  • [2] Majumdar S., Sharma I.G., Raveendra S., Et al., In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM, Mat Sci Eng A, 492, pp. 211-217, (2008)
  • [3] Govindarajan S., Mishra B., Olson D.L., Moore J.J., Disam J., Synthesis of molybdenum disilicide on molybdenum substrates, Surf. Coat. Tech, 76-77, pp. 7-13, (1995)
  • [4] urface Engineering, Surface Engineering of Refractory Metals and Alloys, 5, pp. 856-863
  • [5] Ito K., Murakami T., Adachi K., Yamaguchi M., Oxidation behavior of Mo-9Si-18B alloy pack-cemented in a Si-base pack mixture, Intermetallics, 11, pp. 763-772, (2003)
  • [6] Ito K., Hayashi T., Yokobayashi M., Numakura H., Evolution kinetics and microstructure of MoSi2 and Mo5Si3 surface layers on two-phase Mo-9Si-18B alloy during pack-cementation and high-temperature oxidation, Intermetallics, 12, pp. 407-415, (2004)
  • [7] Moskal G., Mikuskiewicz M., Witala B., Et al., Characterization of silicide coatings on Mo and TZM alloy, Ochrona przed korozją, 5, pp. 184-187, (2014)
  • [8] Suzuki R.O., Ishikawa M., Ono K., MoSi coating on molybdenum using molten salt, J. Alloy Compd, 306, pp. 285-291, (2006)
  • [9] Packer C.M., Perkins R.A., J Less-Common Met, 37, pp. 361-378, (1974)
  • [10] Cox A.R., Brown R., Protection of molybdenum from oxidation by molybdenum disilicide based coatings, J. Less-Common Met, 6, pp. 51-69, (1964)
12