Al3105/polypropylene/Al3105 laminates springback in V-die bending

被引：0
|
作者：
机构：
[1] [1,2,Parsa, M.H.
[2] Mohammadi, S.V.
[3] Aghchai, A. Jalali
来源：
Parsa, M.H. | 1600年 / Springer London卷 / 75期
关键词：
Metal/polymer/metal laminated sheets have shown promising properties; as being light weight; in automotive and aircraft industries. In this paper; the effect of punch radius on springback in the early stage of V-die bending process of aluminum/polypropylene/aluminum sheets is studied both numerically and experimentally. To analyze springback behavior; contact pressure evolution during bending process was studied using numerical simulation. Springback behavior relies on bending moment and sheet thinning. Bending moment and sheet thinning depend on circumferential and transverse stress distributions along sheet thickness and sheet length. Overall opposite effect of bending moment and sheet thinning makes an increase in springback with punch radius. Parametric study was performed to investigate the effect of polymeric core on springback. It was observed that in a given thickness configuration; springback of laminate lies between those of polymeric and metallic monolayer sheets with the same thickness. Also; an increase in sandwich sheet thickness leads to a decrease in springback. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：5 / 8
相关论文
共 33 条
  • [31] Prediction of Five-point Bending Springback of Ti-6Al-4V Plates Based on Variable Elastic Modulus
    Qu C.
    Meng Z.
    Zhao L.
    Chen Y.
    Ma L.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2022, 33 (16): : 1991 - 1999
  • [32] Influence of the electric pulse on springback during stretch U-bending of Ti6Al4V titanium alloy sheets
    Zhao, Yixi
    Peng, Linfa
    Lai, Xinmin
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 261 : 12 - 23
  • [33] Springback prediction model of Ti-6Al-4V tube warm bending based on modified JC model considering variable temperature field
    Wang, L.
    Wang, Z. L.
    Zhang, S. Y.
    Lin, Y. C.
    Ful, M. Y.
    19TH INTERNATIONAL CONFERENCE ON METAL FORMING, MF 2022, 2022, 1270
1234