Al3105/polypropylene/Al3105 laminates springback in V-die bending

被引：0
|
作者：
机构：
[1] [1,2,Parsa, M.H.
[2] Mohammadi, S.V.
[3] Aghchai, A. Jalali
来源：
Parsa, M.H. | 1600年 / Springer London卷 / 75期
关键词：
Metal/polymer/metal laminated sheets have shown promising properties; as being light weight; in automotive and aircraft industries. In this paper; the effect of punch radius on springback in the early stage of V-die bending process of aluminum/polypropylene/aluminum sheets is studied both numerically and experimentally. To analyze springback behavior; contact pressure evolution during bending process was studied using numerical simulation. Springback behavior relies on bending moment and sheet thinning. Bending moment and sheet thinning depend on circumferential and transverse stress distributions along sheet thickness and sheet length. Overall opposite effect of bending moment and sheet thinning makes an increase in springback with punch radius. Parametric study was performed to investigate the effect of polymeric core on springback. It was observed that in a given thickness configuration; springback of laminate lies between those of polymeric and metallic monolayer sheets with the same thickness. Also; an increase in sandwich sheet thickness leads to a decrease in springback. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：5 / 8
相关论文
共 33 条
  • [21] Springback evaluation in hot v-bending of Ti-6Al-4V alloy sheets
    Yingying Zong
    Po Liu
    Bin Guo
    Debin Shan
    The International Journal of Advanced Manufacturing Technology, 2015, 76 : 577 - 585
  • [22] Analytical and Numerical Prediction of Springback of SS/Al-Alloy Cladded Sheet in V-Bending
    Sharma, Pankaj Kumar
    Gautam, Vijay
    Agrawal, Atul Kumar
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (03):
  • [23] Effect of electropulsing on springback during V-bending of Ti-6Al-4V titanium alloy sheet
    Dongwei Ao
    Xingrong Chu
    Yang Yang
    Shuxia Lin
    Jun Gao
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 3197 - 3207
  • [24] Effect of electropulsing on springback during V-bending of Ti-6Al-4V titanium alloy sheet
    Ao, Dongwei
    Chu, Xingrong
    Yang, Yang
    Lin, Shuxia
    Gao, Jun
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (9-12): : 3197 - 3207
  • [25] Effect of yield criterion and variable elastic modulus on springback prediction of Ti-6Al-4V sheet V-shaped bending
    Liu, Zijian
    Ma, Lidong
    Meng, Zhijuan
    Liu, Peiyu
    Du, Yukang
    International Journal of Advanced Manufacturing Technology, 2021, 116 (5-6): : 1925 - 1936
  • [26] Effect of yield criterion and variable elastic modulus on springback prediction of Ti-6Al-4V sheet V-shaped bending
    Liu, Zijian
    Ma, Lidong
    Meng, Zhijuan
    Liu, Peiyu
    Du, Yukang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 116 (5-6): : 1925 - 1936
  • [27] Effect of yield criterion and variable elastic modulus on springback prediction of Ti-6Al-4V sheet V-shaped bending
    Zijian Liu
    Lidong Ma
    Zhijuan Meng
    Peiyu Liu
    Yukang Du
    The International Journal of Advanced Manufacturing Technology, 2021, 116 : 1925 - 1936
  • [28] Experimental study and numerical simulation on springback of Ti-6Al-4V alloy under hot U-bending
    Fenqiang Li
    Jishuai Jiang
    Juemei Wang
    Jinguo Wang
    Xinyu Chen
    Journal of Mechanical Science and Technology, 2023, 37 : 3691 - 3697
  • [29] Experimental study and numerical simulation on springback of Ti-6Al-4V alloy under hot U-bending
    Li, Fenqiang
    Jiang, Jishuai
    Wang, Juemei
    Wang, Jinguo
    Chen, Xinyu
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2023, 37 (07) : 3691 - 3697
  • [30] Springback characterization and behaviors of high-strength Ti-3Al-2.5V tube in cold rotary draw bending
    Li, H.
    Yang, H.
    Song, F. F.
    Zhan, M.
    Li, G. J.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (09) : 1973 - 1987
1234