Al3105/polypropylene/Al3105 laminates springback in V-die bending

被引：0
|
作者：
机构：
[1] [1,2,Parsa, M.H.
[2] Mohammadi, S.V.
[3] Aghchai, A. Jalali
来源：
Parsa, M.H. | 1600年 / Springer London卷 / 75期
关键词：
Metal/polymer/metal laminated sheets have shown promising properties; as being light weight; in automotive and aircraft industries. In this paper; the effect of punch radius on springback in the early stage of V-die bending process of aluminum/polypropylene/aluminum sheets is studied both numerically and experimentally. To analyze springback behavior; contact pressure evolution during bending process was studied using numerical simulation. Springback behavior relies on bending moment and sheet thinning. Bending moment and sheet thinning depend on circumferential and transverse stress distributions along sheet thickness and sheet length. Overall opposite effect of bending moment and sheet thinning makes an increase in springback with punch radius. Parametric study was performed to investigate the effect of polymeric core on springback. It was observed that in a given thickness configuration; springback of laminate lies between those of polymeric and metallic monolayer sheets with the same thickness. Also; an increase in sandwich sheet thickness leads to a decrease in springback. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：5 / 8
相关论文
共 33 条
  • [11] SPRINGBACK BEHAVIOR OF CARBON-FIBER-REINFORCED PLASTIC LAMINATES WITH METAL COVER LAYERS IN V-DIE BENDING
    Hahn, Marlon
    Weddeling, Christian
    Ben Khalifa, Nooman
    Shabaninejad, Arash
    PROCEEDINGS OF THE ASME 11TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2016, VOL 1, 2016,
  • [12] Position deviation and springback in V-die bending process with asymmetric dies
    Daw-Kwei Leu
    The International Journal of Advanced Manufacturing Technology, 2015, 79 : 1095 - 1108
  • [13] Springback Behavior of Carbon-Fiber-Reinforced Plastic Laminates With Metal Cover Layers in V-Die Bending
    Hahn, Marlon
    Ben Khalifa, Nooman
    Weddeling, Christian
    Shabaninejad, Arash
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (12):
  • [14] Position deviation and springback in V-die bending process with asymmetric dies
    Leu, Daw-Kwei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (5-8): : 1095 - 1108
  • [15] Springback and fracture in v-die air bending of thick stainless steel sheets
    Asnafi, N
    MATERIALS & DESIGN, 2000, 21 (03): : 217 - 236
  • [16] Prediction of springback in V-die air bending process by using finite element method
    Trzepiecinski, Tomasz
    Lemu, Hirpa G.
    8TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2017) - TRENDS IN NEW INDUSTRIAL REVOLUTION, 2017, 121
  • [17] Springback Evaluation of Tailor Welded Blanks at V-die Bending made of DP Steels
    Beres, Gabor
    Lukacs, Zsolt
    Tisza, Miklos
    23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, 2020, 47 : 1366 - 1373
  • [18] Relationship between mechanical properties and geometric parameters to limitation condition of springback based on springback–radius concept in V-die bending process
    Daw-Kwei Leu
    The International Journal of Advanced Manufacturing Technology, 2019, 101 : 913 - 926
  • [19] Relationship between mechanical properties and geometric parameters to limitation condition of springback based on springback-radius concept in V-die bending process
    Leu, Daw-Kwei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (1-4): : 913 - 926
  • [20] Springback evaluation in hot v-bending of Ti-6Al-4V alloy sheets
    Zong, Yingying
    Liu, Po
    Guo, Bin
    Shan, Debin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 76 (1-4): : 577 - 585
1234