Effect of clay on properties of polyimide-clay nanocomposites

被引：0

作者：

Department of Chemistry, Center for Nanotechnology, Chung-Yuan Christian University, Chung-Li 320, Taiwan ^{[1
]}

机构：

来源：

Journal of Applied Polymer Science | 2007年 / 104卷 / 01期

关键词：

Effect of clay on mechanical; thermal; moisture absorption; and dielectric properties of polyimide-clay nanocomposites was investigated. Nanocomposites of polyimide (ODA-BSAA) hybridized with two modified clay (PK-802 and PK-805) were synthesized for comparison. The silicate layers in the polymer matrix were intercalated/exfoliated as confirmed by wide-angle X-ray diffraction and transmission electron microscopy. Thermal stability; and storage modulus for these nanocomposites are improved as hybridized clay increases. Reduced dielectric constants due to the hybridization of layered silicates are observed at frequencies of 1 kHz-1 MHz and temperatures of 35-150°C. The tetrahedrally substituted smectite (PK-805) resulted in higher mechanical strength and dielectric constants than those of octahedrally substituted smectite (PK-802); which could be attributed to their stronger ionic bonding between clay layer and polymer matrix. © 2007 Wiley Periodicals; Inc;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：318 / 324

共 50 条

[1] Effect of some compatibilizing agents on clay dispersion of polypropylene-clay nanocomposites
López-Quintanilla, M.L.
Sánchez-Valdés, S.
Ramos De Valle, L.F.
Medellín-Rodríguez, F.J.
Journal of Applied Polymer Science, 2006, 100 (06): : 4748 - 4756
[2] The linear viscoelastic properties of copolypropylene-clay nanocomposites
Zhong, Weixia
Qiao, Xiuying
Sun, Kang
Zhang, Guoding
Chen, Xiaodong
Journal of Applied Polymer Science, 1600, 99 (04): : 1523 - 1529
[3] Polypropylene/clay nanocomposites: Effect of different clays and compatibilizers on their morphology
Palza, Humberto
Vergara, Rodrigo
Yazdani-Pedram, Mehrdad
Quijada, Raúl
Journal of Applied Polymer Science, 2009, 112 (03): : 1278 - 1286
[4] Preparation and mechanical properties of acrylonitrile-butadiene-styrene copolymer/clay nanocomposites
Kim, Hun-Sik
Park, Byung Hyun
Choi, Jae Hoon
Yoon, Jin-San
Journal of Applied Polymer Science, 1600, 107 (04): : 2539 - 2544
[5] Effect of clay on immiscible morphology of poly(butylene terephthalate)/polyethylene blend nanocomposites
Wu, Defeng
Zhou, Chixing
Zhang, Ming
Journal of Applied Polymer Science, 2006, 102 (04): : 3628 - 3633
[6] Dielectric Response of HDPE/Clay Nanocomposites Containing 10% wt of Organo-Modified Clay
David, E.
Zazoum, B.
Frechette, M. F.
Rogti, F.
2015 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (CEIDP), 2015, : 531 - 534
[7] Effect of alkylammonium salt on the dispersion and properties of poly(p-phenylene sulfide)/clay nanocomposites via melt intercalation
Zou, Hao
Xu, Wei
Zhang, Qing
Fu, Qiang
Journal of Applied Polymer Science, 1600, 99 (04): : 1724 - 1731
[8] Effect of ethylene glycidyl methacrylate compatibilizer on the structure and mechanical properties of clay nanocomposites modified with ethylene vinyl acetate copolymer
Department of Chemistry, University of the Free State , Private Bag X13, Phuthaditjhaba 9866, South Africa
不详
Journal of Applied Polymer Science, 2007, 103 (06): : 4095 - 4101
[9] Morphology and melt rheology of nylon 11/clay nanocomposites
He, Xiaofeng
Yang, Jun
Zhu, Lianchao
Wang, Biao
Sun, Guangping
Lv, Pengfei
Phang, In Yee
Liu, Tianxi
Journal of Applied Polymer Science, 2006, 102 (01): : 542 - 549
[10] Designing polylactide/clay nanocomposites for textile applications: Effect of processing conditions, spinning, and characterization
Solarski, Samuel
Ferreira, Manuela
Devaux, Eric
Fontaine, Gaëlle
Bachelet, Pierre
Bourbigot, Serge
Delobel, René
Coszach, Philippe
Murariu, Marius
Da Silva Ferreira, Amália
Alexandre, Michael
Degee, Philippe
Dubois, Philippe
Journal of Applied Polymer Science, 2008, 109 (02): : 841 - 851

← 1 2 3 4 5 →