Design of a sensing coil in portable fiber optic current transformer

被引：0
作者：
Wang X.-X. [1 ]
Zhang Y.-N. [1 ]
Yu J. [1 ]
Li C.-S. [2 ]
机构：
[1] School of Instrument Science & Optoelectronic Engineering, Beihang University, Beijing
[2] National Institute of Metrology, Beijing
来源：
Guangzi Xuebao/Acta Photonica Sinica | 2016年 / 45卷 / 12期
关键词：
Conductor eccentric; Current sensor; Faraday effect; Fiber optic sensing; Finite element; Non-closed error; Sensing coil;
D O I：
10.3788/gzxb20164512.1228004
中图分类号：
学科分类号：
摘要：
To deal with the problem of complex large current measurement site in electrolytic aluminum industry, a portable fiberoptic current transformer was proposed on the basis of the traditional fiber opticcurrent transformerin. The Faraday phase shift error which caused by the flexible sensing coil non-closed optical path and current conductor eccentric position in the process of design and installation was analyzed and calculated by finite element method. It has been obtained that the Faraday phase shift relative error increases linearly with the non-closed angle of sensing coil and decreases with the increasing distance between conductor and the non-closed point, and the Faraday phase shift relative error can be decreased by increasing number of turns. Based the accuracy of portable fiberoptic current transformer increases with the distance between conductor and the non-closed point, a sensor head structure with the extending non-closed point and easy accessibility was designed, it has been obtained that the full temperature accuracy is 0.86% of portable fiberoptic current transformer by experimental test, which meets the required accuracy 1% in smelter. © 2016, Science Press. All right reserved.
引用
收藏
页数：6
相关论文
共 19 条
  • [1] Sxshor T., Tselikov A.A., De Arruda J.U., Et al., Imperfect quarter-wave plate compensation in Sagnac interferometer-type current sensors, Lightwave Technology, 16, 7, pp. 1212-1219, (1998)
  • [2] Wang X.-X., Zhang C.-X., Zhang C.-Y., Et al., Study of polarization errors of all fiber optical current transformers, Acta Photonica Sinica, 36, 2, pp. 320-323, (2007)
  • [3] Zhang C.-Y., Zhang C.-X., Wang X.-X., Et al., Influence of SLD's power attenuation on scale factor of closed-loop fiber optic current transformer, Acta Photonica Sinica, 37, 12, pp. 2458-2461, (2008)
  • [4] Wang L.-H., Cao M., Liu Q.-C., Et al., Modeling and experimental verification of polarization errors in Sagnac fiber optic current sensor, Optik, 126, 20, pp. 2743-2746, (2015)
  • [5] Wang X.-X., Wang Y., Wang X.-C., Et al., Experimental research on dynamic characteristics of fiber optical current transformer, Power System Protection and Control, 42, 3, pp. 9-14, (2014)
  • [6] Bohnert K., Gabus P., Nehring J., Et al., Temperature and vibration insensitive fiber-optic current sensor, Lightwave Technology, 20, 2, pp. 267-276, (2002)
  • [7] Li X.-Y., Hao J.-H., Yang H.-R., Et al., Research and development of Sagnacringlike optic current sensor, High Voltage Apparatus, 38, 7, pp. 1-6, (2011)
  • [8] Li H., Yao Y.-J., Rational main circuit topology of high-power DC power supply for electrolytic aluminum, Modern Electronics Technique, 34, 24, pp. 33-36, (2011)
  • [9] Jiao B.-L., Zheng S.-X., Progress in optical current transducer technique for power systems, Applied Optics, 25, 6, pp. 47-53, (2004)
  • [10] Li H., Li Q., Zhang S.-H., Et al., Development of a zero-flux DC current transformer of HVDC projects, High Voltage Engineering, 38, 11, pp. 2981-2985, (2012)
12