IEEE standard 1451 and a proposed time synchronization approach

被引：0

作者：

Electrical and Computer Engineering, Instituto Superior Técnico, Technical University of Lisbon , Lisbon, Portugal ^{[1
]}

机构：

[1] Electrical and Computer Engineering, Instituto Superior Técnico, Technical University of Lisbon (IST/UTL), Lisbon

来源：

IEEE Instrum Meas Mag | 2008年 / 2卷 / 29-37期

关键词：

(Edited Abstract);

D O I：

10.1109/MIM.2008.4483731

中图分类号：

学科分类号：

摘要：

Aside from 1451 standard that focuses on simplifying transducer connectivity to existing control and transmission networks, there are numerous instrument buses, sensor control networks, sensor buses, and fieldbuses have been promoted and implemented. Enhancements for the IEEE 1451 set of standards for smart transducers. In order to obtain accurate time-determined sampling in the network of IEEE 1451 devices, the implementation of the IEEE 1588, the Precision Time Protocol (PTP) is offered. The PTP is applicable to systems that support multicast messaging such as Universal Serial Bus (USB) and enables precise synchronization of the real-time clocks present in the Transducer Interface Modules (TIMs). The use of the IEEE 1588 protocol allows trigger synchronization accuracies of several hundreds of nanoseconds. The use of USB permit standard IEEE 1451.2-1997 to be used with multipoint interfaces having a real-time triggering capabilities.

引用

页码：29 / 37

页数：8

共 6 条

[1]

Lee K., IEEE 1451: A standard in support of smart transducer interface networking, Proc. IMTC 2000, pp. 525-528, (2000)

[2]

IEEE Standards

[3]

Sensors

[4]

Ramos H., Pereira M., Viegas V., Postolache O., Girao R., A centronics based transducer independent interface (TII) fully compliant with 1451.2 Std, Proc. IMEKO TC4 Symposium, 2, pp. 555-560, (2004)

[5]

Johnson R.N., Woods S., Overview and Status Update for IEEE 1451.2: Transducer and Microprocessor Communications Protocols and Transducer Electronic Data Sheet (TEDS) Formats

[6]

Radil T., Ramos P.M., Cruz Serra A., DSP based portable impedance measurement instrument using sine-fitting algorithms, IMTC 2005 - Instrumen. and Meas. Technol. Conf, 2, pp. 1018-1022, (2005)

← 1 →