Flywheel moment on-line determination method and application in hydraulic-turbine unit

被引：0
作者：
Zhang, Fei [1 ]
Geng, Zaiming [2 ]
Fu, Jing [3 ]
Pan, Luoping [1 ]
机构：
[1] Department of Hydro-electric Machinery, China Institute of Water Resources and Hydropower Research, Beijing
[2] Maintenance Department of Hydraulic Machinery and Dam Engineering, Xiluodu Hydropower Station, Yongshan
[3] Department of Comprehensive Service, China Institute of Water Resources and Hydropower Research, Beijing
来源：
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2015年 / 35卷 / 05期
关键词：
Correlation coefficient; Flywheel moment; Hydraulic-turbine unit; Online monitoring; Wavelet transform;
D O I：
10.16450/j.cnki.issn.1004-6801.2015.05.020
中图分类号：
学科分类号：
摘要：
In order to achieve online flywheel moment monitoring, formulas to calculate the flywheel are derived and research on the flywheel moment is performed based on the increase in speed in the load rejection mode of a hydro-generator unit. A new method is proposed to monitor the flywheel moment. Speed signal sources are sorted into analog signals from the control system and signals from the toothed disc. For the analog speed signal, the wavelet theory is adopted to de-noise the signal, then the correlation coefficient between the speed and defined time is calculated to determine the effective increase in speed within the defined correlation coefficient. For the signal from the toothed disc, a maximum correlation coefficient between the speed and the limited period of time is calculated to determine the effective speed signal. Finally, the flywheel moment is calculated based on GB/T1029-2005. The effectiveness of this method has been tested and verified through case study. ©, 2015, Nanjing University of Aeronautics an Astronautics. All right reserved.
引用
收藏
页码：927 / 931
页数：4
相关论文
共 10 条
  • [1] Yang J., Gao Z., Fly wheel effect research on transient process of hydropower station, Water Resources and Power, 23, 2, pp. 47-49, (2005)
  • [2] Li X., Ou C., Mao J., Et al., Calculation and analysis on unit inertia determination, Yangtze River, 38, 11, pp. 51-52, (2007)
  • [3] Tian F., Yu T., Discussion on the problems in load rejection test of large size generating unit, Electric Power, 33, 7, pp. 84-88, (2000)
  • [4] Feng W., Study of turning inertia measurement of rotor for steam generator set, Power Engineering, 26, 5, pp. 11-15, (1998)
  • [5] Zhang A., Chai J., Wang S., Et al., Inertial compensation methods for generator sets in dynamic power system simulations, Journal of Tsinghua University: Science and Technology, 46, 10, pp. 1661-1664, (2006)
  • [6] Zheng C., Shang H., Ciren Y., Et al., Analysis on influence mechanism of rotational inertia level of generators at sending end on outward power transmission capability for Linzi power network connected with Tibet power grid, Power System Technology, 36, 12, pp. 119-124, (2012)
  • [7] Peng D., Yang J., Study on choice of flywheel moment GD<sup>2</sup> of hydro-generator units in Qingjiang Shuibuya water power plant, Large Electric Machine and Hydraulic Turbine, 28, 5, pp. 16-19, (2002)
  • [8] Gou Z., Fu L., Li G., Et al., Test and analyse of flywheel moment for pumped storage unit, Large Electric Machine and Hydraulic Turbine, 39, 9, pp. 21-24, (2013)
  • [9] Zhao Y., Zhang X., Wang J., Et al., Measurement of time-varying moment of inertia based on Hilbert transform, Journal of Mechanical Engineering, 48, 20, pp. 22-26, (2012)
  • [10] Gao B., Han F., Huang X., Et al., Comparison research of two filter approaches on the data of rocket, Journal of Chongqing University, 26, 1, pp. 25-27, (2003)
1