Wane-and-wax mechanism of nitrogenous disinfection byproducts with constant Cl/N peak under UV/chlorine treatment: Implication for new drinking water disinfection strategy

Nitrogenous disinfection byproducts (N-DBPs) are notorious for their serious health risks, yet nitrate (NO3- ) mediates N-DBPs generation during UV/chlorine treatment remains unexplored. This study investigated the interaction of chlorine and NO3 - on N-DBPs formation and developed a specific fragment-based screening method using UPLC-QTOF-MS to explore the underlying mechanism. Results showed that the chlorine-to-nitrogen (Cl/ NO3- -N) molar ratio significantly affects dichloroacetonitrile (DCAN) and dichloroacetamide (DCAM) generation, with peak concentrations at a Cl/NO3- -N molar ratio of around 15. NO3- promotes the production of HO center dot, which positively correlates with DCAN and DCAM concentrations, also peaking at this ratio. Utilizing our developed method, three key hydroxyl-substituted intermediates that circumvent the previously reported "limiting-steps" in DCAN formation were identified. This reaction proceeds via a stepwise mechanism involving hydroxylation and chlorine substitution to produce hydroxyl-phenylacetonitrile and hydroxyl-chlorine-phenylacetonitrile. The conversion rate of hydroxyl-chlorine-phenylacetonitrile to DCAN was 8.6 times higher at Cl/NO3--N molar ratio of 15 compared to conditions without NO3- , attributed to the weakened bond strength of the side chain, as supported by density functional theory calculations. This study provides novel insights into the mechanistic pathways of DCAN and DCAM formation, critical for developing more effective drinking water disinfection technologies to control N-DBPs.