Definition of stress and strain ranges for multiaxial fatigue life evaluation under non-proportional loading

被引：0

作者：

机构：

[1] Div. of Mech. Eng., Graduate School of Engineering, Univ. of Fukui, Bunkyo, Fukui

[2] Dept. of Mech. Eng., Collage of Science and Engineering, Ritsumeikan Univ., Nojihigashi, Kusatsu

[3] Course of Mech. Eng., Graduate School of Engineering, Univ. of Fukui, Bunkyo, Fukui

来源：

Itoh, T. | 2013年 / Society of Materials Science Japan卷 / 62期

关键词：

Fatigue life evaluation; Low cycle fatigue; Multiaxial fatigue; Non-proportional loading; Stress and strain;

D O I：

10.2472/jsms.62.117

中图分类号：

学科分类号：

摘要：

A simple and clear method of evaluating stress and strain ranges under non-proportional multiaxial loading where principal directions of stress and strain are changed during a cycle is needed for assessing multiaxial fatigue. This paper proposes a simple method of determining the principal stress and strain ranges and the severity of non-prop ortional loading with defining the rotation angles of the maximum principal stress and strain in a three dimensional stress and strain space. Based on the method proposed, non-proportional stress and strain ranges are derived and applicability of the range to the life evaluation of type 304 stainless steel under 15 proportional and non-proportional strain paths are discussed. The strain range taking account of intensity of loading path reducing life can be suitable parameter for multiaxial fatigue life evaluation under non-proportional loading. © 2013 The Society of Materials Science, Japan.

引用

页码：117 / 124

页数：7

共 22 条

[11]

Itoh T., Effect of direction change in maximum principal strain axis on multiaxial low cycle fatigue life of type 304 stainless steel at elevated temperature, Journal of the Society of Materials Science, Japan, 49, 9, pp. 988-993, (2000)

[12]

Itoh T., A model for evaluation of low cycle fatigue lives under non-proportional straining, Journal of the Society of Materials Science, Japan, 50, 12, pp. 1317-1322, (2001)

[13]

Itoh T., Sakane M., Hata T., Hamada N., A design procedure for assessing low cycle fatigue life under proportional and non-proportional loading, International Journal of Fatigue, 28, 8, pp. 495-466, (2006)

[14]

Itoh T., Sakane M., Ozaki T., Determination of strain and stress ranges under cyclic propoitional and non-propoitional loading, Journal of the Society of Materials Science, Japan, 60, 2, pp. 88-93, (2011)

[15]

Itoh T., Yang T., Material dependence of multiaxial low cycle fatigue lives under non-proportional loading, International Journal of Fatigue, 33, 8, pp. 1025-1031, (2011)

[16]

Ogata T., Nitta A., Evaluation of multiaxial low-cycle fatigue failure based on new criterion and its application to high temperature structural design, Journal of the Society of Materials Science, Japan, 42, 472, pp. 72-77, (1993)

[17]

Kohayashi M., Ohno N., Igari T., Thermal ratcheting analysis of cylinders subjected to axial travelling of temperature distribution: Comparison with experiments of 316FR steel cylinders, Journal of the Society of Materials Science, Japan, 46, 8, pp. 906-913, (1997)

[18]

Aoto K., Structural materials development for sodium cooled fast reactor, Materia Japan, 47, 9, pp. 459-463, (2008)

[19]

Sakane M., Ohnami M., Sawada M., Fracture modes and low cycle biaxial fatigue life at elevated temperature, Transaction of the American Society of Mechanical Engineers, Journal of Eogioeeriog Materials Aod Techoology, 109, pp. 236-242, (1987)

[20]

Sakaoe M., Ohoamiaod M., Hamada N., Biaxial low cycle fatigoe for ootched, cracked, and smooth specimens at high temperature, Transaction of the American Society of Mechanical Engineers, Journal of Engineering Materials and Technology, 110, pp. 48-54, (1988)

← 1 2 3 →