Design of test-bed for automatic depth of furrow opening control system based on ATmega128 single chip microcomputer

被引：0
|
作者：
Cai G. [1 ]
Li H. [1 ]
Li H. [1 ]
Wang Q. [1 ]
He J. [1 ]
Ni J. [1 ]
机构：
[1] College of Engineering, China Agricultural University
来源：
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering | 2011年 / 27卷 / 10期
关键词：
Agriculture machinery; Depth of furrow opening; Design; Electro-hydraulic proportional control; Microcontrollers; Test-bed;
D O I：
10.3969/j.issn.1002-6819.2011.10.002
中图分类号：
学科分类号：
摘要：
To develop an automatic depth of furrow opening control system for no-till seeders, an automatic depth of furrow opening control system for indoor test-bed was designed. It was made up of a measuring unit, a controller, a driving board, hydraulic system, adjusting mechanism, an opener, and so on. And it achieved tracking control of the depth of furrow opening. The results indicated that when the depth of furrow opening was 50 mm deeper than the desired value, the steady-state response time was about 0.48 s, and when that is shallower than the desired value, the steady-state response time was about 0.6 s, The maximum error of them both were less than 10 mm. The results also showed that when the undulation slope of surface imitating board was smaller(motor speed was about 10 r/min), the dynamic response error was limited to -30-30 mm, when that was bigger (motor speed was about 25 r/min), the dynamic response error was limited to -60-40 mm. The imitating static and dynamic response experiment could be carried out based on this test-bed for automatic depth of furrow opening control system, while control strategy should be studied further to decrease time of improve the performance of the system.
引用
收藏
页码：11 / 16
页数：5
相关论文
共 16 条
  • [1] Gao H., Li H., Li W., Development of conservation tillage, Transactions of the Chinese Society for Agricultural Machinery, 39, 9, pp. 43-48, (2008)
  • [2] pp. 100-102, (2008)
  • [3] Gao H., Li H., Yao Z., Study on the light no-till seeders with high anti-blockage performance, China Engineering Science, 9, 9, pp. 35-39, (2007)
  • [4] pp. 23-24, (2007)
  • [5] Zhao H., An ultrasonic sensor attached to the opener, Machinery for Cereals, Oil and Food Processing, 1, (1989)
  • [6] Weatherly E.T., Bowers Jr.C.G., Automatic depth control of a seed planter based on soil drying front sensing, Transactions of ASAE, 40, 2, pp. 295-305, (1997)
  • [7] Saeys W., Engelen K., Ramon H., Et al., An automatic depth control system for shallow manure injection, part 1: Modelling of the depth control system, Biosystems Engineering, 98, 10, pp. 146-154, (2007)
  • [8] Saeys W., Wallays C., Engelen K., Et al., An automatic depth control system for shallow slurry injection, part 2: Control design and field validation, Biosystems Engineering, 99, 2, pp. 161-170, (2008)
  • [9] Sogaard H.T., Automatic control of a finger weeder with respect to the harrowing intensity at varying soil structures, J agric. Engng Res, 70, 6, pp. 157-163, (1998)
  • [10] Mouazen M., Anthonis J., Saeys W., Et al., An automatic depth control system for online measurement of spatial variation in soil compaction, part 1: Sensor design for measurement of frame height variation from soil surface, Biosystems Engineering, 89, 2, pp. 139-150, (2004)
12