Effect of reduction method on the surface states of Pt/Al2O3

被引：0

作者：

Liu, Zhi-Min ^{[1
,2
]}

Li, Xiao-Hong ^{[1
]}

Chen, Zhi-Jian ^{[1
]}

Ying, Ping-Liang ^{[1
]}

Feng, Zhao-Chi ^{[1
]}

Li, Can ^{[1
]}

机构：

[1] State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences

[2] Graduate University, Chinese Academy of Sciences

来源：

Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology | 2009年 / 37卷 / 02期

基金：

中国国家自然科学基金;

关键词：

Preparation; Pt/Al[!sub]2[!/sub]O[!sub]3[!/sub; Reduction method; Surface states;

D O I：

10.1016/s1872-5813(09)60017-7

中图分类号：

学科分类号：

摘要：

Pt/Al2O3 with Pt loading of 5% was prepared and characterized by infrared spectroscopy (IR) combined with CO chemisorption, energy dispersive spectrometry (EDS), and transmission electron microscopy (TEM). The effects of reduction methods including commonly used dry reduction by gaseous H2 and wet reduction by sodium formate (HCOONa) aqueous solution on the surface states of Pt/Al2O3 were investigated. The results show that both the calcination and reduction can affect the particle sizes and surface sites of Pt. For the catalyst Pt/Al2O3 reduced by HCOONa solution, the ratio of terrace to step sites on the surface of Pt increases along with the calcination temperature. Subsequent to the identical calcination procedures, the wet reduction by HCOONa solution results in less residual chlorine and lower Pt dispersion than the dry reduction by gaseous H2. The violent reduction condition of HCOONa solution and the presence of water are both responsible for the agglomeration of Pt particles. The presence of water can facilitate the dissolution and removal of chlorine from the catalysts when reduced in an aqueous solution.

引用

页码：205 / 211

页数：6

共 18 条

[1]

Farrauto R.J., Bartholomew C.H., Fundamentals of Industrial Catalytic Processes, (1997)

[2]

Radivojevic' D., Seshan K., Lefferts L., Preparation of well-dispersed Pt/SiO2 catalysts using low-temperature treatments, Appl Catal A, 301, 1, pp. 51-58, (2006)

[3]

Zhang Z.-H., Hu S., Han X.-L., Xu B.-J., Yan Z.-F., Study on dispersity of platinum on SAPO-11 zeolite, Journal of Fuel Chemistry and Technology, 33, 6, pp. 746-749, (2005)

[4]

Wu Y.-Z., Development of a novel Pt/Al2O3 catalyst for benzene hydrogenation, Natural Gas Chemical Industry, 33, 1, pp. 52-56, (2008)

[5]

Crisafulli C., Scire S., Giuffrida S., Ventimiglia G., Lonigro R., An investigation on the use of liquid phase photo-deposition for the preparation of supported Pt catalysts, Appl Catal A, 306, pp. 51-57, (2006)

[6]

Gracia F.J., Miller J.T., Kropf A.J., Wolf E.E., Kinetics, FTIR, and controlled atmosphere EXAFS study of the effect of chlorine on pt-supported catalysts during oxidation reactions, J Catal, 209, 2, pp. 341-354, (2002)

[7]

Somorjai G.A., Chemistry in Two Dimensions: Surfaces, (1981)

[8]

Banholzer W.F., Masel R.I., Nitric oxide decomposition on Pt(410), J Catal, 85, 1, pp. 127-134, (1984)

[9]

Olsbye U., Wendelbo R., Akporiaye D., Study of Pt/alumina catalysts preparation, Appl Catal A, 152, 1, pp. 127-141, (1997)

[10]

Lieske H., Lietz G., Spindler H., Volter J., Reactions of platinum in oxygen- and hydrogen-treated Pt/γ-Al2O3 catalysts: I Temperature-programmed reduction, adsorption, and redispersion of platinum, J Catal, 81, 1, pp. 8-16, (1983)

← 1 2 →