Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid

被引：0
|
作者：
Cireli, Aysun [1 ]
Kutlu, Bengi [1 ]
Mutlu, Mehmet [2 ]
机构：
[1] Textile Engineering Department, Faculty of Engineering, Dokuz Eylul University, Izmir, Turkey
[2] Plasma Aided Biotechnology and Bioengineering Research Group (PABB), Faculty of Engineering, Hacettepe University, Ankara, Turkey
来源：
Journal of Applied Polymer Science | 2007年 / 104卷 / 04期
关键词：
In this study; the surface characteristics of polyester and polyamide fabrics were changed by plasma polymerization technique utilizing acrylic acid as precursor. This monomer was used to produce hydrophilic materials with extended absorbency. The hydrophilicity; total wrinkle recovery angle (WRA°) and breaking strength of the fabrics were determined prior and after plasma polymerization treatment. The modification of surfaces was carried out at low pressure (<100 Pa) and low temperature (<50°C) plasma conditions. The effects of exposure time and discharge power parameters were optimized by comparing properties of the fabrics before and after plasma polymerization treatments. It was shown that two sides of polyester fabric samples were treated equally and homogeneously in plasma reactor. For polyester fabrics; the minimum wetting time; 0.5; s; was observed at two plasma processing parameters of 10 W-45 min and 10 W-20 min; where untreated fabric has a wetting time of 6 s. For polyester fabrics; the maximum value was obtained at 60 W-5 min with the wrinkle recovery angle of 306° where the untreated fabric has 290°. The optimum plasma conditions for polyamide fabrics were determined as 30 W-45 min where 2 s wetting time was observed. Wrinkle recovery angle of untreated polyamide fabric was 264°. In this study; after plasma polymerization of acrylic acid; wrinkle recovery angle values were increased by 13%. No significant change was observed in breaking strength of both fabrics after plasma treatment. © 2007 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：2318 / 2322
相关论文
共 50 条
  • [41] Surface modification of polypropylene non-woven fabrics by atmospheric-pressure plasma activation followed by acrylic acid grafting
    Cernáková, L
    Kovácik, D
    Zahoranová, A
    Cernák, M
    Mazúr, M
    PLASMA CHEMISTRY AND PLASMA PROCESSING, 2005, 25 (04) : 427 - 437
  • [42] Surface Modification of Polypropylene Non-Woven Fabrics by Atmospheric-Pressure Plasma Activation Followed by Acrylic Acid Grafting
    L’. Černáková
    D. Kováčik
    A. Zahoranová
    M. Černák
    M. Mazúr
    Plasma Chemistry and Plasma Processing, 2005, 25 : 427 - 437
  • [43] Surface modification of UHMWPE fiber by low temperature plasma treatment and g rafting using acrylic acid
    Zhao, Yanning
    Han, Guanglin
    Hou, Jinguo
    Wang, Chunlian
    Wan, Jing
    Ma, Ji
    Sun, Li
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2013, 29 (06): : 62 - 65
  • [44] Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization
    Sun, Jie
    Yao, Lan
    Gao, Zhiqiang
    Peng, Shujing
    Wang, Chunxia
    Qiu, Yiping
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (24): : 4101 - 4106
  • [45] Surface modification and smart functionalization of polyester-containing fabrics
    Ibrahim, N. A.
    Eid, B. M.
    Youssef, M. A.
    Ameen, H. A.
    Salah, A. M.
    JOURNAL OF INDUSTRIAL TEXTILES, 2013, 42 (04) : 353 - 375
  • [46] Effect of Plasma Polymerization of Hexamethyldisiloxane on Polyester/Cotton Blended Fabrics Properties
    Kale, Kiran H.
    Palaskar, Shital
    Bhat, N. V.
    AATCC REVIEW, 2012, 12 (02) : 53 - 60
  • [47] Surface modification of carbon fiber by redox-induced graft polymerization of acrylic acid
    Xu, Zhiwei
    Wu, Xiaoqing
    Sun, Ying
    Jiao, Yanan
    Li, Jialu
    Chen, Li
    Lu, Liangsen
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 108 (03) : 1887 - 1892
  • [48] Acrylic acid plasma polymerization for biomedical use
    Bitar, Rim
    Cools, Pieter
    De Geyter, Nathalie
    Morent, Rino
    APPLIED SURFACE SCIENCE, 2018, 448 : 168 - 185
  • [49] Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions
    Wang, C. X.
    Du, M.
    Lv, J. C.
    Zhou, Q. Q.
    Ren, Y.
    Liu, G. L.
    Gao, D. W.
    Jin, L. M.
    APPLIED SURFACE SCIENCE, 2015, 349 : 333 - 342
  • [50] Surface modification of polyester films by RF plasma
    Gupta, B
    Hilborn, J
    Hollenstein, C
    Plummer, CJG
    Houriet, R
    Xanthopoulos, N
    JOURNAL OF APPLIED POLYMER SCIENCE, 2000, 78 (05) : 1083 - 1091
12345