Vibration characteristics of blade tip in a shaft⁃disk⁃cracked⁃blade coupling system

被引：0

作者：

Wu Z. ^{[1
]}

Zhao L. ^{[1
]}

Yan G. ^{[1
]}

Hu H. ^{[2
]}

Yang Z. ^{[3
]}

Zhang W. ^{[1
]}

机构：

[1] State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai

[2] Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, Changsha

[3] State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an

来源：

Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2024年 / 45卷 / 04期

基金：

中国国家自然科学基金;

关键词：

aerodynamic load; breathing crack; gravity load; rotor unbalance force; shaft-disk-cracked-blade;

D O I：

10.7527/S1000-6893.2023.28346

中图分类号：

学科分类号：

摘要：

Aero-engine blades，subjected to extreme environmental conditions，are susceptible to crack develop⁃ ment，which shortens blade life and seriously affects the safe operation of aero-engine. This paper focuses on the shaft-disk-cracked-blade coupling system which is modeled using the mixed strategy of the finite element method and the assumed mode method. The shaft is simulated by finite element method，while the disk and blade are simulated by Kirchhoff plate theory and Timoshenko beam theory. A dynamic model is built based on time-varying loss stiffness caused by the breathing crack which is determined by the time-varying release strain energy. The correctness of the proposed method is confirmed by comparing the natural characteristics and vibration responses of the coupling sys⁃ tem. The influences of gravity load，rotor unbalance force and aerodynamic load on vibration characteristics of the blade tip are analyzed，and the impact of different dimensionless crack depths and crack locations on the vibration characteristics of the blade tip are investigated. The research results show that：in a healthy blade，the gravity load can cause the blade to vibrate，and the unbalanced force can induce the static deformation of the blade；under rota⁃ tion，the cracked blade leads to the bending displacement of the blade tip，which produces an offset，while under the action of aerodynamic load，the breathing crack results in nonlinear vibration of the blade；the amplitude ratio of the constant component to the rotational frequency and the amplitude ratio of the constant component to the aerodynamic excitation frequency are valuable indicators for assessing breathing crack. The modeling method and analysis conclu⁃ sions in this paper can provide a specific theoretical basis for the fault diagnosis of aero-engine blade crack. © 2024 Chinese Society of Astronautics. All rights reserved.

引用

共 31 条

[1]

WANG W M, ZHANG X L, HU D F，, Et al., A novel none once per revolution blade tip timing based blade vi⁃ bration parameters identification method［J］, Chinese Journal of Aeronautics, 33, 7, pp. 1953-1968, (2020)

[2]

ZHANG X D, XIONG Y W，, HUANG X，, Et al., Dy⁃ namic characteristics analysis of 3D blade tip clearance for turbine blades with typical cracks［J］, International Journal of Aerospace Engineering, 2022, pp. 1-17, (2022)

[3]

ZENG J, Et al., Vibration response analysis of a cracked rotating compressor blade during Run-up process［J］, Mechanical Systems and Signal Pro⁃ cessing, 118, pp. 568-583, (2019)

[4]

CHEN Z S，, SHENG H, XIA Y M，, Et al., A comprehen⁃ sive review on blade tip timing-based health monitoring：status and future［J］, Mechanical Systems and Signal Pro⁃ cessing, 149, (2021)

[5]

YANG L H, MAO Z, WU S M，, Et al., Steady-state cou⁃ pling vibration analysis of shaft-disk-blade system with blade crack［J］, Nonlinear Dynamics, 105, 1, pp. 61-98, (2021)

[6]

CHIU Y J, HUANG S C., The influence of a cracked blade on rotor’s free vibration［J］, Journal of Vibration and Acoustics, 130, 5, (2008)

[7]

LIU M R，, ZHU J，, LIANG E B, Et al., Vibration mea⁃ surement on compressor rotor blades of aero-engine based on tip-timing［J］, Journal of Aerospace Power, 34, 9, pp. 1895-1904, (2019)

[8]

LIU M R, FAN Y，, Et al., Application of blade tip timing technology in rotor blade fault elimination ［J］, Journal of Aerospace Power, 37, 12, pp. 2818-2829, (2022)

[9]

CHEN Z S, XIONG Y P，, Et al., Nonlinear dy⁃ namic behaviors of rotated blades with small breathing cracks based on vibration power flow analysis［J］, Shock and Vibration, 2016, pp. 1-11, (2016)

[10]

XIE J S, ZHANG M Q，, Et al., A novel vibration modeling method for a rotating blade with breathing cracks［J］, Science China Technological Sciences, 62, 2, pp. 333-348, (2019)

← 1 2 3 4 →