Characteristics analysis of non-linear torsional vibration in engine and generator shafting system

被引：0
作者：
Zhang, Wei [1 ]
Zhang, Wenming [1 ]
Zhao, Xuan [1 ]
Guo, Miaomiao [2 ]
机构：
[1] School of Mechanical Engineering, University of Science and Technology Beijing, Beijing
[2] Automotive Engineering Research Institute, Beiqi Foton Motor Co. Ltd., Beijing
来源：
Telkomnika (Telecommunication Computing Electronics and Control) | 2015年 / 13卷 / 01期
关键词：
Engine; Gengrator; Mathematical model; Non-linear; Torsional vibration;
D O I：
10.12928/TELKOMNIKA.v13i1.129
中图分类号：
学科分类号：
摘要：
The objective of this paper is to solve the non-linear torsional vibration problem of engine and generator shafting causing body structural vibration and noise in motorized wheel vehicle, where the engine and the generator connected directly. First, analysis the characteristics of the shafting system is conducted, besides the external shock excitation of engine and generator. Then, through lumped parameter model method, mathematical model of the non-linear torsional vibration was established, which could reflect the dynamic characteristics of the system. Analysis the effect of mechanical parameters and electromagnetic parameters on the shafting; and get the non-linear differential equations of the system torsional vibration, which expresses the relation between structural parameters, electromagnetic parameters and the system dynamic characteristics. And multiple scales method was used to solve the equations. Non-contact measurement method was used in the torsional vibration test. Finally, consistency of the results, indicate that the research method used is reliability and accuracy, and get the critical speed of the shafting torsional vibration.
引用
收藏
页码：41 / 54
页数：13
相关论文
共 23 条
  • [11] Liu H., Cai Z., Xiang C., Dynamic characteristics of vehicular planetary gears influenced by engine excitation and backlash based on nonlinear torsional vibration model, pp. 115-126, (2013)
  • [12] Deighan T.P., Whitehead T., Driveline vibration analysis for successful clutch spring pack design for a 4 cylinder motorcycle engine, SAE Technical Paper, (2013)
  • [13] Szczepaniak K.A., Kesy Z., Damping performance of power transmission system with hydraulic torque converter, Vehicle System Dynamics, 20, pp. 473-479, (1991)
  • [14] Henao H., Kia S.H., Capolino G.A., Torsional-vibration assessment and gear-fault diagnosis in railway traction system, Industrial Electronics, IEEE Transactions on, 58, 5, pp. 1707-1717, (2011)
  • [15] Sung S.H., Nefske D.J., Chen F.H.K., Et al., Development of an engine system model for prediction structural vibration and radiated noise of the running engin, SAE 972039, 6, pp. 611-613, (1999)
  • [16] Mourelatos Z., Crankshaft system model for structural dynamic analysis of internal combustion engines, Computers & Structures, 6, pp. 102-107, (2001)
  • [17] Shangguan W.B., Chen C., Duan X.C., Et al., Modeling and experimental analysis of torsional vibration in engine crankshaft system, Journal of Vibration, Measurement & Diagnosis, 32, 4, pp. 560-567, (2012)
  • [18] Nagar A., Chokkalingam V., Umashankar N., Et al., Improvement in crank train torsional vibration (TV) performance of multi-cylinder diesel engine, SAE Technical Paper, (2013)
  • [19] Li X.Q., Wang G., Lv B.L., Et al., Calculation method and characteristics analysis of torsional vibration of diesel generating set shaft system in short circuit condition, Chinese Internal Combustion Engine Engineering, 34, 2, pp. 18-23, (2013)
  • [20] Manin L., Dufour R., Schultz S., Pulley torsional vibration damper characterization, Mechanics & Industry, 14, 2, pp. 151-155, (2013)
123