A PAM control method for matrix converter based on virtual AC/DC/AC conversion method

被引：9

作者：

Odaka, Akihiro ^{[1
,3
]}

Sato, Ikuya ^{[1
,3
]}

Ohguchi, Hideki ^{[1
,3
]}

Tamai, Yasuhiro ^{[1
,3
]}

Mine, Hironori ^{[1
,3
]}

Itoh, Jun-Ichi ^{[2
,4
]}

机构：

[1] Fuji Electric Advanced Technology Co., Ltd., Hino 191-8502, 1, Fuji-machi

[2] Nagaoka University of Technology, Nagaoka 940-2185, 1603-1, Kamitomioka-cho

[3] Fuji Electric Advanced Technolgy Co., Ltd.

来源：

IEEJ Transactions on Industry Applications | 2006年 / 126卷 / 09期

关键词：

AC/DC/AC conversion; Common-mode voltage; Matrix converter; PAM control; Total harmonic distortion;

D O I：

10.1541/ieejias.126.1185

中图分类号：

学科分类号：

摘要：

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. Firstly, the proposed method is explained. Next, the validity of the proposed method is confirmed thorough simulation and experiment using a 750W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of experiment, it has been understood that total harmonic distortion of output current and common-mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method.

引用

页码：1185 / 1192+3

共 8 条

[1]

Venturini M., A new sine wave in sine wave out conversion technique which eliminates reactive elements, Proc. Powercon, 7, (1980)

[2]

Oyama I., Higuchi T., Yamada E., Koga T., Lipo T., New Control Strategy for matrix converter, Proc. Power Electronics Society Conf., pp. 360-367, (1989)

[3]

Ishigro A., Furuhashi T., Okuma S., A novel control method for forced commutated cycloconverters using input line to line voltage, Proc. International Power Electronics Conf., pp. 761-766, (1990)

[4]

Itoh J., Sato I., Ohguchi H., Sato K., Odaka A., Eguchi N., A control method for the matrix converter based on virtual AC/DC/AC conversion using carrier comparison method, T. IEE Japan, 124 D, 5, pp. 457-463, (2004)

[5]

Hara H., Yamamoto E., Zenke M., Kang J., Kume T., An improvement of output voltage control performance for low voltage region of matrix converter, Proc. of the 2004 Japan Industry Applications Society Conference, (2004)

[6]

Shimada H., Takeshita T., PWM Control of Three-phase to Three-phase Matrix Converter for Reducing Output Voltage Harmonics, (2005)

[7]

Itoh J., Kodachi H., Odaki A., Sato I., Ohguchi H., Umida H., A high performance control method for the matrix converter based on PWM generation of virtual AC/DC/AC conversion, Proc. of the 2004 Japan Industry Appl. Society Conf., (2004)

[8]

Ohguchi H., Itoh J., Kodachi K., Sato I., Odaka A., Eguchi N., An Improvement Scheme of Voltage Control Performance for Matrix Converter

← 1 →