Effects of high-temperature exposure on mechanical properties of thermal sprayed CoNiCrAlY alloy coating

被引：0
作者：
Yamano H. [1 ]
Takabatake T. [1 ]
Tani K. [1 ]
机构：
[1] Thermal Spraying Technology RandD Laboratories, Tocalo Co., Ltd., Akashi-shi, Hyogo, 674-0093, 14-3 Minamifutami, Futami-cho
来源：
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2010年 / 76卷 / 767期
关键词：
Bending; Coating material; CoNiCrAlY alloy; Hardness; High temperature exposure; Residual stress; Strain tolerance; Stress-Strain measurement; Thermal spray coating; Young's modulus;
D O I：
10.1299/kikaia.76.794
中图分类号：
学科分类号：
摘要：
Thermal spraying is widely used in various industrial fields as effective surface modification method. In this study, mechanical properties of thermal sprayed CoNiCrAlY alloy coating were investigated. The coatings were prepared by three kinds of thermal spray methods. High-temperature exposure of the coated specimens was carried out in the atmosphere. After high-temperature exposure, apparent Young's modulus, strain tolerance, residual stress and hardness of the CoNiCrAlY coating were measured. These tests were also carried out using specimens without hightemperature exposure. As a result, the changes of mechanical properties caused by high-temperature exposure seemed to be correlated with properties of boundary between sprayed particles. From the results, effects of high-temperature exposure on mechanical properties of thermal sprayed CoNiCrAlY alloy coating were discussed.
引用
收藏
页码：794 / 801
页数：7
相关论文
共 50 条
  • [31] AFTEREFFECTS PRODUCED IN ALLOY-600 BY EXPOSURE TO LITHIATED HIGH-TEMPERATURE WATER
    XIA, Z
    LAI, WK
    SZKLARSKASMIALOWSKA, Z
    CORROSION, 1991, 47 (03) : 173 - 176
  • [32] Influence of thermal spray process on high temperature oxidation property of CoNiCrAlY coatings
    Suidzu T.
    Nishizako S.
    Arai M.
    1600, Society of Materials Science Japan (65): : 313 - 318
  • [33] Effects of Thermal Exposure on the Microstructure and Mechanical Properties of Al-Si-Cu-Ni-Mg-Gd Alloy
    Sui, Yudong
    Han, Lina
    Wang, Qudong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (02) : 908 - 915
  • [34] Effects of residual stress on the mechanical properties of plasma-sprayed thermal barrier coatings
    Zhang, Xiancheng
    Watanabe, Makoto
    Kuroda, Seiji
    ENGINEERING FRACTURE MECHANICS, 2013, 110 : 314 - 327
  • [35] Mechanical Properties of Nanostructured CoCrFeNiMn High-Entropy Alloy (HEA) Coating
    Dang, Chaoqun
    Surjadi, James U.
    Gao, Libo
    Lu, Yang
    FRONTIERS IN MATERIALS, 2018, 5
  • [36] Effects of in-situ laser remelting on structural evolution and high-temperature tribological properties of plasma sprayed Cu11.85Al3.2Mn0.1Ti coating
    Sun, Chengwen
    Kong, Dejun
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [37] Microstructural characteristics and mechanical properties of HVOF sprayed NiCrAl coating on superalloys
    Mahesh, R. A.
    Jayaganthan, R.
    Prakash, S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 468 (1-2) : 392 - 405
  • [38] Evaluation of the mechanical properties of plasma-sprayed coating by nanoindentation technology
    Guo, Wei-Chao
    Rauchs, Gast
    Papeleux, Luc
    Zhang, Wei-Hong
    Gitzhofer, Francois
    Ponthot, Jean-Philippe
    MECHANICS & INDUSTRY, 2012, 13 (03) : 151 - 162
  • [39] Biocompatible nanostructured high-velocity oxyfuel sprayed titania coating: Deposition, characterization, and mechanical properties
    Lima, R. S.
    Li, H.
    Khor, Khiam Aik
    Marple, B. R.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2006, 15 (04) : 623 - 627
  • [40] Biocompatible nanostructured high-velocity oxyfuel sprayed titania coating: Deposition, characterization, and mechanical properties
    R. S. Lima
    B. R. Marple
    H. Li
    K. A. Khor
    Journal of Thermal Spray Technology, 2006, 15 : 623 - 627
12345