Towards Sustainability in Hydraulic Machinery Manufacturing by 3D Printing

被引:3
作者
Remache, Abel [1 ]
Perez-Sanchez, Modesto [2 ]
Hidalgo, Victor Hugo [3 ]
Ramos, Helena M. [4 ]
Sanchez-Romero, Francisco-Javier [5 ]
机构
[1] Univ Cent Ecuador, Fac Ingn & Ciencias Aplicadas, Ind Design Dept, Quito 170129, Ecuador
[2] Univ Politecn Valencia, Hydraul Engn & Environm Dept, Valencia 46022, Spain
[3] Escuela Politec Nacl, Fac Ingn Mecan, Lab Mecan Informat, Quito 170517, Ecuador
[4] Univ Lisbon, Dept Civil Engn Architecture & Environm, Civil Engn Res & Innovat Sustainabil CERIS, Inst Super Tecn, P-1049001 Lisbon, Portugal
[5] Univ Politecn Valencia, Rural & Agrifood Engn Dept, Valencia 46022, Spain
关键词
impellers; turbomachinery; additive manufacturing; 3D printing; materials; corrosion; TOPOLOGY OPTIMIZATION; ENVIRONMENTAL-IMPACT; DESIGN; PUMP; IMPELLER;
D O I
10.3390/pr12122664
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Material wear, maintenance costs, performance, efficiency, and corrosion are some of the issues that turbomachinery impellers may encounter. The optimization of impellers through additive manufacturing (AM) has been the focus of extensive research, aiming to address these challenges in turbine, pump, compressor, fan, and mixer components. This research aims to identify and analyze the main techniques currently being developed to tackle several of these issues. Evaluating the published research, the methodology highlights various AM techniques applied to impellers and related components, as well as the diverse materials used in functional system elements. The analysis revealed that the most commonly used additive manufacturing technologies for the production of turbomachinery components are FDM, with a 22% application rate, and powder bed fusion technology, accounting for 35%, utilized for high-complexity parts and even superalloys. Although more expensive, these technologies employ materials with superior resistance capabilities, surpass the limitations of conventional machining, optimize manufacturing times, and allow for the fine-tuning of multiple parameters. In terms of wear and corrosion resistance, materials such as Inconel 718 exhibited a loss of less than 0.1 mpy (mils per year) in highly corrosive environments, representing a significant improvement over traditional materials.
引用
收藏
页数:26
相关论文
共 154 条
[81]   Design for Six Sigma (DFSS) for additive manufacturing applied to an innovative multifunctional fan [J].
Liverani, Alfredo ;
Caligiana, Gianni ;
Frizziero, Leonardo ;
Francia, Daniela ;
Donnici, Giampiero ;
Dhaimini, Karim .
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2019, 13 (01) :309-330
[82]   The Influence of the Design Features of the Submersible Pump Rotor on the Vibration Reliability [J].
Makivskyi, O. ;
Kondus, V ;
Pitel, J. ;
Sotnyk, M. ;
Andrusiak, V ;
Polkovnychenko, V ;
Musthai, M. .
JOURNAL OF ENGINEERING SCIENCES-UKRAINE, 2024, 11 (01) :D1-D9
[83]  
Mamazhonov M., 2022, Journal of Physics: Conference Series, V2176, DOI 10.1088/1742-6596/2176/1/012048
[84]   Building new entities from existing titanium part by electron beam melting: microstructures and mechanical properties [J].
Mandil, Guillaume ;
Van Thao Le ;
Paris, Henri ;
Suard, Mathieu .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (5-8) :1835-1846
[85]   Carbon Fiber Polymer Reinforced 3D Printed Composites for Centrifugal Pump Impeller Manufacturing [J].
Mansour, Gabriel ;
Papageorgiou, Vasileios ;
Tzetzis, Dimitrios .
TECHNOLOGIES, 2024, 12 (04)
[86]   A General Framework for Designing 3D Impellers Using Topology Optimization and Additive Manufacturing [J].
Meli, E. ;
Furferi, R. ;
Rind, A. ;
Ridolfi, A. ;
Volpe, Y. ;
Buonamici, F. .
IEEE ACCESS, 2020, 8 :60259-60269
[87]   Design and Production of Innovative Turbomachinery Components via Topology Optimization and Additive Manufacturing [J].
Meli, Enrico ;
Rindi, Andrea ;
Ridolfi, Alessandro ;
Furferi, Rocco ;
Buonamici, Francesco ;
Iurisci, Giuseppe ;
Corbo, Simone ;
Cangioli, Francesco .
INTERNATIONAL JOURNAL OF ROTATING MACHINERY, 2019, 2019
[88]   Microstructure of IN738LC Fabricated Using Laser Powder Bed Fusion Additive Manufacturing [J].
Menon, Nandana ;
Mahdi, Tanjheel Hasan ;
Basak, Amrita .
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2022, 144 (03)
[89]   Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping [J].
Michaud, Mathias ;
Milan, Petro, Jr. ;
Huu Duc Vo .
INTERNATIONAL JOURNAL OF ROTATING MACHINERY, 2016, 2016
[90]   Defects in Turbine Impeller Blades with Non-destructive Testing: Modeling, Ultrasonic Waves, Defect Analysis [J].
Mirmahdi E. .
Mirmahdi, Esmaeil (esmaeilmirmehdi69@yahoo.com), 1600, Springer (102) :1395-1401