A finite element analysis method for random fiber-aggregate 3D mesoscale concrete based on the crack bridging law

Mesoscale modeling is an emerging analytical method that can be used to study fiber-reinforced concrete. However, fine fibers with micrometer diameters are distributed in millions in a standard specimen, so it is impossible to establish a mesoscale model and further analyze it, which severely limits the investigation of the reinforcement mechanism of fine fibers on concrete. This paper efficiently established a highly applicable mesoscale analytical model for random fiberpolyhedral aggregate concrete in Abaqus software based on a comprehensive examination of the crack bridging law and the supplementation of the fiber spacing theory, combined with the improvement of the algorithms of aggregate generation, fiber arrangement, and the judgment of the fiber-aggregate contact by the secondary development method of Python, as well as the matrix-dual arrangement method. Additionally, basalt fiber concrete and mortar specimens were prepared and tested, and the parameters of the model were calibrated to verify the model's authenticity. The result shows that the method proposed in this paper can accurately and efficiently perform mesoscale concrete analysis with fine fibers. In the peak load stage, the fiber has the strongest alleviation effect (Delta = 0.033) on the matrix damage, 10 times that of the crack initiation stage (Delta = 0.003). With the development of damage, fiber stress increases gradually from the crack initiation stage (0.68 afu), and the growth rate (41.53 %) is the largest at the peak load stage (afu), which reveals the complex dynamic bridging effect of fiber on the matrix. This investigation proposes a novel and broad applicability methodology for the finite element analysis of fiber-reinforced aggregate mesoscale concrete.