Dynamic characteristics of a micro-mechanical-resonator with squeeze film damping

被引:0
作者
Zhang, Qi-Chang [1 ]
Zhou, Fan-Sen [1 ]
Wang, Wei [1 ]
机构
[1] Tianjin Municipal Key Laboratory of Nonlinear Dynamics and Chaos Control, School of Mechanical Engineering, Tianjin University, Tianjin
来源
Zhendong yu Chongji/Journal of Vibration and Shock | 2015年 / 34卷 / 17期
关键词
Ambient pressure; Micro-mechanical-resonator; Squeeze film damping;
D O I
10.13465/j.cnki.jvs.2015.17.021
中图分类号
学科分类号
摘要
Electrostatically actuated micromechanical resonators with advantages of high frequency, low-power consumption and small size are widely used in chemical sensors and sensors of biological species, these sensors work in air or liquid. The air damping as surface effects and the cubic nonlinear static electrical stiffness can significantly affect the dynamic response characteristics of a micromechanical resonator. Here, via the squeeze-film damping theory, the effects of air damping caused by ambient pressure during free vibration and cubic nonlinear static electrical stiffness on the patterns of movement and response performance of a mirco beam fixed at both ends were investigated in detail. The relationships between the dynamic characteristics of the resonator and ambient pressure as well as nonlinear static electrical stiffness were found. The results indicated that the resonance frequencies of the micromechanical resonator increase with increase in ambient pressure, while the vibration amplitudes and the resonance drift decline with increase in ambient pressure; the cubic nonlinear static electrical stiffness makes the resonators exhibit softening or hardening nonlinear characteristics, they can not be ignored in amplitude-frequency curves of the resonaters' small amplitude vibration. ©, 2015, Chinese Vibration Engineering Society. All right reserved.
引用
收藏
页码:124 / 130
页数:6
相关论文
共 50 条
[41]   A Low-G Silicon Inertial Micro-Switch with Enhanced Contact Effect Using Squeeze-Film Damping [J].
Peng, Yingchun ;
Wen, Zhiyu ;
Li, Dongling ;
Shang, Zhengguo .
SENSORS, 2017, 17 (02)
[42]   Optimization Strategy for Resonant Mass Sensor Design in the Presence of Squeeze Film Damping [J].
Li, Chengzhang ;
Miller, Michele H. .
MICROMACHINES, 2010, 1 (03) :112-128
[43]   Efficient Numerical Evaluation of Semianalytical Models for Squeeze Film Damping for Torsion Mirrors [J].
Gugat, Martin .
JOURNAL OF NANOMECHANICS AND MICROMECHANICS, 2013, 3 (04)
[44]   Squeeze film damping in the free molecular flow regime with full thermal accommodation [J].
Suijlen, M. A. J. ;
Koning, J. J. ;
van Gils, M. A. J. ;
Beijerinck, H. C. W. .
SENSORS AND ACTUATORS A-PHYSICAL, 2009, 156 (01) :171-179
[45]   On the Effective Viscosity Expression for Modeling Squeeze-Film Damping at Low Pressure [J].
Pantano, Maria F. ;
Pagnotta, Leonardo ;
Nigro, Salvatore .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2014, 136 (03)
[46]   Analysis of Squeeze Film Air Damping with Lattice Boltzmann Method in Transition Regime [J].
Zhu, Chengde ;
Li, Pu ;
Yang, Longfei ;
Fang, Yuming .
2019 IEEE 4TH INTERNATIONAL CONFERENCE ON INTEGRATED CIRCUITS AND MICROSYSTEMS (ICICM 2019), 2019, :109-113
[47]   Squeeze film damping analysis, of biomimetic micromachined microphone for sound source localization [J].
Ishfaque, Asif ;
Kim, Byungki .
SENSORS AND ACTUATORS A-PHYSICAL, 2016, 250 :60-70
[48]   DYNAMIC PULL-IN INSTABILITY AND VIBRATION ANALYSIS OF A NONLINEAR MICROCANTILEVER GYROSCOPE UNDER STEP VOLTAGE CONSIDERING SQUEEZE FILM DAMPING [J].
Mojahedi, M. ;
Ahmadian, M. T. ;
Firoozbakhsh, K. .
INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2013, 5 (03)
[49]   Effect of random surface roughness on squeeze film damping characteristics in damper of linear rolling guide with a fractal-based method [J].
Li, Linlin ;
Yang, Jiajun ;
Liu, Wenwei .
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2015, 67 (06) :549-556
[50]   Design, optimisation and predicted performance of a micro-machined IR sensor that exploits the squeeze film damping effect to measure cantilever beam displacement [J].
Smith, P. D. ;
Chatwin, C. R. ;
Young, R. C. D. .
OPTICS AND LASERS IN ENGINEERING, 2007, 45 (04) :503-522