Optimization design of multi-stage submersible pump based on CFD

被引：0
作者：
Cui, Baoling [1 ]
Meng, Jiajia [1 ]
Jia, Xiaoqi [1 ]
机构：
[1] Province Key Laboratory of Fluid Transmission Technology, Zhejiang Sci-Tech University
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery | 2012年 / 43卷 / 11期
关键词：
CFD; Efficiency; Genetic algorithm; Multi-stage submersible pump; Optimization design;
D O I：
10.6041/j.issn.1000-1298.2012.11.027
中图分类号：
学科分类号：
摘要：
Combined with the characteristics of multi-stage submersible pump, the pump with sloping impeller and space guide vane was optimized using efficiency as optimization object. To improve the accuracy of numerical simulation, parametric fitting for sloping impeller and space guide vane was carried out. In the process of optimization, the blade inlet and outlet angle of the impeller and guide vane were considered as the control parameters. The range of angle was increased ±20°compared with the original model. Based on the successive flow field check, the optimal impeller model was obtained in the variation range of control parameters searching the optimum value of objective function based on genetic algorithm. The optimal model was obtained when inlet angle at the bottom of the blade was 35.53° and the outlet angle was 27.32°, the inlet angle of the guide vane was 15.48° and outlet angle was 61.75°. The pump efficiency increased by 4.12%, and the single stage head increased 1.449 m. The range of high efficiency has been extended, the stability of pump operation is improved, and the performance of the pump is optimized.
引用
收藏
页码：142 / 146
页数：4
相关论文
共 11 条
  • [1] Shi W., Wang H., Well pump research present situation and the development tendency, Drainage and Irrigation Machinery, 27, 1, pp. 64-68, (2009)
  • [2] (2008)
  • [3] Lu W., Zhang Q., Shi W., Impeller diameter maximum approach for deep well pumps, Drainage and Irrigation Machinery, 24, 5, pp. 1-7, (2006)
  • [4] Zhou L., Shi W., Lu W., Et al., Numerical prediction and experiment of axial force on deep-well centrifugal pump, Transactions of the Chinese Society for Agricultural Machinery, 43, 7, pp. 100-103, (2012)
  • [5] Tian H., Sun X., Guo T., Et al., Optimization for the hydraulic performance of centrifugal blade based on the genetic algorithm, Transactions of the Chinese Society for Agricultural Machinery, 41, 5, (2010)
  • [6] Li Y.C., Yang D.L., Feng Z.P., Inverse problem in aerodynamic shape design of turbomachinery blades, 2006 Proceedings of ASME Turbo Expo: Power for Land, Sea, and Air, 6, pp. 1535-1543, (2006)
  • [7] Li J., Feng Z., Chang J., Aerodynamic optimum design of transonic turbine cascade using genetic algorithms, Journal Thermal Science, 6, 2, pp. 111-116, (1997)
  • [8] Ernesto B., Three-dimensional multi-objective design optimization of a transonic compressor rotor, Journal of Propulsion and Power, 20, 3, pp. 559-565, (2004)
  • [9] Derakhshan S., Monhammadi B., Nourbakhsh A., Incomplete sensitivities for 3D radial turbomachinery blade optimization, Computers & Fluids, 37, 10, pp. 1354-1363, (2008)
  • [10] Behr T., Porreca L., Mokulys T., Et al., Multistage aspects and unsteady effects of stator and rotor clocking in an axial turbine with low aspect ratio blading, Journal of Turbomachinery, 128, pp. 11-22, (2006)
12