Modified efficient global optimization for a hat-stiffened composite panel with buckling constraint

被引：0

作者：

Todoroki, Akira ^{[1
,2
,3
]}

Sekishiro, Masato ^{[1
,2
,3
]}

机构：

[1] Tokyo Institute of Technology, Tokyo 152-8552, Japan

[2] Department of Mechanical Sciences and Engineering, 2-12-1, O-okayama, Meguro, Japan

[3] AIAA

来源：

AIAA Journal | 2008年 / 46卷 / 09期

关键词：

The optimization method for composite structural components described herein uses modified efficient global optimization with a multi-objective genetic algorithm and a kriging response surface. For efficient global optimization using kriging; the kriging response surface is used as a representative of the function value. The stochastic distribution of the kriging is used to improve the estimation error of the kriging surrogate model. Using efficient global optimization; a hat-stiffened composite panel was optimized to reduce the weight with the buckling load constraint. The expected improvement was used as a single objective function of a particle swarm optimization. Nevertheless; it is difficult to obtain a feasible solution that satisfies buckling load constraints with the progress of optimization. Using a multi-objective genetic algorithm; we obtain the feasible optimal structure satisfying the constraints. The expected improvement objective function is divided into two objective functions: weight reduction and the uncertainty of satisfaction of the buckling load constraint. Kriging approximation; which is improved with the selected Pareto optimal frontier; reduces the computational cost. Also; a genetic algorithm is used to optimize the stiffened panel configuration. The fractal branch-and-bound method is used for stacking sequence optimizations. This method obtained a feasible optimal structure at a low computational cost;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Conference article (CA)

引用

页码：2257 / 2264

共 50 条

[41] Warping thermal deformation constraint for optimization of a blade stiffened composite panel using GA
Todoroki, Akira
Ozawa, Takumi
INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, 2013, 14 (04) : 334 - 340
[42] Rubber mandrel design suitable for manufacture co-cured hat-stiffened composite panel with large curvature by auto fiber placement technique
Huang, Chunxu
Wang, Shan
Liu, Yang
Li, Yang
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2024,
[43] FEA of dynamic behavior of Top hat bonded stiffened composite panel
Mohamad, G.
Tarfaoui, M.
Bertram, V.
STRUCTURAL ANALYSIS OF ADVANCED MATERIALS, 2010, 446 : 137 - +
[44] Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts
Rayhan, S. B.
INTERNATIONAL JOURNAL OF ENGINEERING, 2021, 34 (01): : 243 - 252
[45] Stiffened panel structural optimization on wing skin of "WHALE" aircraft with local and global buckling criteria
Ikhsan, M.
Syamsudin, H.
Suada, M. G.
6TH INTERNATIONAL SEMINAR OF AEROSPACE SCIENCE AND TECHNOLOGY (ISAST), 2018, 1130
[46] Elastic buckling response of a composite panel stiffened around cutouts
Rayhan S.B.
Rayhan, S.B. (rayhan.saiaf@mail.nwpu.edu.cn), 1600, Materials and Energy Research Center (34): : 243 - 252
[47] Equivalent laminates model for stiffened panel global buckling analysis
Zhao, Qun
Jin, Haibo
Ding, Yunliang
Chi, Peng
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2009, 26 (03): : 195 - 201
[48] Costweight optimization design of composite stiffened panel
Ye, Jinrui
Zhang, Boming
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2009, 26 (02): : 187 - 194
[49] Structural layout optimization of composite stiffened panel
Zhang, Tieliang
Ding, Yunliang
Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2010, 42 (01): : 8 - 12
[50] The influence of high toughness resin region on the pull-off failure process of hat-stiffened composite structures
Yang, Xiao
Li, Guangji
Sun, Cheng
Niu, Shichao
Yang, Yicong
Liu, Xiaolin
Shao, Chun
ENGINEERING FAILURE ANALYSIS, 2025, 169

← 1 2 3 4 5 →