Thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses

被引：0

作者：

Cheung, T.L. ^{[1
]}

Shek, C.H. ^{[1
]}

机构：

[1] Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong, Hong Kong

来源：

Journal of Alloys and Compounds | 2007年 / 434-435卷 / SPEC. ISS.期

关键词：

The effects of adding small amount of aluminum to the binary Cu50Zr50 bulk metallic glass (BMG) on the thermal and mechanical properties were investigated. The Al addition was limited to 3 &le x &le 10 at.% in order to form fully amorphous bulk samples. Glassy rods of 3 mm diameter of these alloys were prepared by copper mold suction casting. The (Cu50Zr50)100-xAlx BMGs (x = 0 and 3 &le x &le 10 at.%) were characterized with differential scanning calorimetry (DSC); X-ray diffraction (XRD); Vickers microhardness test and nanoindentation; respectively. The glass transition temperatures; crystallization temperatures and super-cooled liquid regions of the specimens increased with increasing Al content. The microhardness of the specimens also increases with increasing Al content. Room temperature nanoindentation was carried out on the cross-section of the rods. The results showed that the nanohardness and creep displacement were dependent on the Al content. © 2006 Elsevier B.V. All rights reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：71 / 74

共 50 条

[31] Formation of Cu-Zr-Al bulk metallic glass composites with improved tensile properties
Wu, Y.
Wang, H.
Wu, H. H.
Zhang, Z. Y.
Hui, X. D.
Chen, G. L.
Ma, D.
Wang, X. L.
Lu, Z. P.
ACTA MATERIALIA, 2011, 59 (08) : 2928 - 2936
[32] Effect of Sm on Crystallization Kinetics of Cu-Zr-Al Metallic Glasses
Sikan, F.
Polat, G.
Kalay, I.
Kalay, Y. E.
THERMOCHIMICA ACTA, 2020, 683
[33] Characterization of mechanical relaxation in a Cu-Zr-Al metallic glass
Liu, Chaoren
Pineda, Eloi
Crespo, Daniel
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : S17 - S21
[34] Effect of Si addition on glass-forming ability and mechanical properties of Cu-Zr-Al bulk metallic glass
Malekan, M.
Shabestari, S. G.
Zhang, W.
Seyedein, S. H.
Gholamipour, R.
Makino, A.
Inoue, A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (27-28): : 7192 - 7196
[35] Effects of additional noble elements on the thermal stability and mechanical properties of Cu-Zr-Al bulk glassy alloys
Zhang, Wei
Qin, Chunling
Zhang, Xingguo
Inoue, Akihisa
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 631 - 635
[36] Effects of Cr addition on glass-forming ability and mechanical properties of Cu-Zr-Al bulk metallic glass
Zhou, W.
Kong, L. T.
Li, J. F.
Zhou, Y. H.
JOURNAL OF MATERIALS SCIENCE, 2012, 47 (12) : 4996 - 5001
[37] Comparative study between two die cast methods for processing Cu-Zr-Al bulk metallic glasses
Coury, Francisco Gil
Aliaga, Luis César Rodríguez
Afonso, Conrado Ramos Moreira
Bolfarini, Claudemiro
Botta Filho, Walter José
Kiminami, Claudio Shyinti
Journal of Materials Research and Technology, 2013, 2 (02) : 125 - 129
[38] Compositional dependence of thermal, elastic, and mechanical properties in Cu-Zr-Ag bulk metallic glasses
Duan, Gang
De Blauwe, Katrien
Lind, Mary Laura
Schramm, Joseph P.
Johnson, William L.
SCRIPTA MATERIALIA, 2008, 58 (03) : 159 - 162
[39] Cluster line criterion and Cu-Zr-Al bulk metallic glass formation
Wang, Qing
Dong, Chuang
Qiang, Jianbing
Wang, Yingmin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 18 - 23
[40] The effect of oxygen on the microstructural evolution in crystallized Cu-Zr-Al metallic glasses
Coury, F. G.
Botta, W. J.
Bolfarini, C.
Kiminami, C. S.
Kaufman, M. J.
INTERMETALLICS, 2015, 65 : 51 - 55

← 1 2 3 4 5 →