Modification of the physical, mechanical, and thermal properties of poly(vinyl chloride) by blending with poly(ethyl methacrylate)

被引：0
|
作者：
Chakrabarti, Rupa [1 ]
Chakraborty, Debabrata [1 ]
机构：
[1] Department of Polymer Science and Technology, University College of Science and Technology, University of Calcutta, Kolkata 700009, India
来源：
Journal of Applied Polymer Science | 2007年 / 105卷 / 03期
关键词：
Blends of polyvinyl chloride) (PVC) with different ratio of poly(ethyl methacrylate) were characterized with respect to their physical; mechanical; thermal; and morphological properties. The blends indicated a gradual rise in the modulus and ultimate tensile strength values followed by a reduction in the percent elongation at break and toughness values after an initial rise compared to the base reference compound PVC. The effect of composition of the PVCPEMA blends on the thermal stability was investigated. Differential scanning calorimetric curves of the blends showed an inward shift of the PVC glass transition temperature and an upward shift in the degradation temperature. The thermomechanical analysis results also indicated thermal stability over unmodified base reference compound PVC from the softening characteristics of the different samples under study. The biphasic cocontinuous systems as explicit from the scanning electron and optical micrographs supported phase-mixing at the initial stages with subsequent phasing out tendency with increasing percentage of PEMA incorporation. The thermomechanical parameters are in conformity to their mechanicals; which have been further supported by their morphological studies. © 2007 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1377 / 1384
相关论文
共 50 条
  • [41] Mechanical properties of silicone rubber composed of diverse vinyl content silicone gums blending
    Xu, Qiang
    Pang, Minglei
    Zhu, Lixia
    Zhang, Yuanyuan
    Feng, Shengyu
    MATERIALS & DESIGN, 2010, 31 (09) : 4083 - 4087
  • [42] Synthesis and Characterization of Poly(dimethylsiloxane-urethane) Nanocomposites: Effect of (In)Completely Condensed Silsesquioxanes on Thermal, Morphological, and Mechanical Properties
    Madhavan, K.
    Gnanasekaran, D.
    Reddy, B. S. R.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 114 (06) : 3659 - 3667
  • [43] Mechanical, Thermal, and Physicochemical Properties of Filaments of Poly (Lactic Acid), Polyhydroxyalkanoates and Their Blend for Additive Manufacturing
    Mondragon-Herrera, L. Itzkuautli
    Vargas-Coronado, R. F.
    Carrillo-Escalante, H.
    Cauich-Rodriguez, J. V.
    Hernandez-Sanchez, F.
    Velasco-Santos, C.
    Aviles, F.
    POLYMERS, 2024, 16 (08)
  • [44] Morphological and Thermal Studies of Plasticized Poly (methyl methacrylate) Polymer Electrolyte Systems
    Osman, Z.
    Chew, K. W.
    Othman, L.
    Isa, K. B. M.
    INTERNATIONAL CONFERENCE ON ADVANCEMENT OF MATERIALS AND NANOTECHNOLOGY 2007, 2010, 1217 : 525 - +
  • [45] Functional Modification of Poly(vinyl alcohol) Through Phosphorus Containing Nitrogen Heterocyclic Moieties
    Karpagam, S.
    Thangaraj, R.
    Guhanathan, S.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 110 (05) : 2549 - 2554
  • [46] Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement
    Lewis, G
    Janna, S
    Bhattaram, A
    BIOMATERIALS, 2005, 26 (20) : 4317 - 4325
  • [47] Thermal properties of hexadecane encapsulated in poly(divinylbenzene) particles
    Chaiyasat, Preeyaporn
    Suzuki, Toyoko
    Minami, Hideto
    Okubo, Masayoshi
    Journal of Applied Polymer Science, 2009, 112 (06): : 3257 - 3266
  • [48] Study of miscibility, crystallization, mechanical properties, and thermal stability of blends of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4- hydroxybutyrate)
    Luo, Rongcong
    Xu, Kaitian
    Chen, Guo-Qiang
    Journal of Applied Polymer Science, 2007, 105 (06): : 3402 - 3408
  • [49] Investigation of thermal, mechanical and dielectrical properties of LiYO2 filled poly(lactic acid) nanocomposites
    Shruthi, Subbegowda
    Hegde, Vinayakprasanna N.
    Jayashankar, Jayaprakash
    Karthik, Chimatahalli Shanthakumar
    Prashantha, Kalappa
    Mallu, Puttaswamappa
    INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2022, 27 (08) : 586 - 600
  • [50] Influence of Boehmite Nanoparticle Loading on the Mechanical, Thermal, and Rheological Properties of Biodegradable Polylactide/Poly(ε-caprolactone) Blends
    Agwuncha, Stephen C.
    Ray, Suprakas Sinha
    Jayaramudu, Jarugala
    Khoathane, Caroline
    Sadiku, Rotimi
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2015, 300 (01) : 31 - 47
12345