Modification of the physical, mechanical, and thermal properties of poly(vinyl chloride) by blending with poly(ethyl methacrylate)

被引：0
|
作者：
Chakrabarti, Rupa [1 ]
Chakraborty, Debabrata [1 ]
机构：
[1] Department of Polymer Science and Technology, University College of Science and Technology, University of Calcutta, Kolkata 700009, India
来源：
Journal of Applied Polymer Science | 2007年 / 105卷 / 03期
关键词：
Blends of polyvinyl chloride) (PVC) with different ratio of poly(ethyl methacrylate) were characterized with respect to their physical; mechanical; thermal; and morphological properties. The blends indicated a gradual rise in the modulus and ultimate tensile strength values followed by a reduction in the percent elongation at break and toughness values after an initial rise compared to the base reference compound PVC. The effect of composition of the PVCPEMA blends on the thermal stability was investigated. Differential scanning calorimetric curves of the blends showed an inward shift of the PVC glass transition temperature and an upward shift in the degradation temperature. The thermomechanical analysis results also indicated thermal stability over unmodified base reference compound PVC from the softening characteristics of the different samples under study. The biphasic cocontinuous systems as explicit from the scanning electron and optical micrographs supported phase-mixing at the initial stages with subsequent phasing out tendency with increasing percentage of PEMA incorporation. The thermomechanical parameters are in conformity to their mechanicals; which have been further supported by their morphological studies. © 2007 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1377 / 1384
相关论文
共 50 条
  • [31] Effect of poling on the mechanical properties of β-poly(vinylidene fluoride)
    Costa, CM
    Sencadas, V
    Mano, JF
    Lanceros-Méndez, S
    ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 951 - 955
  • [32] Thermal and mechanical behavior of poly(vinyl butyral)-modified novolac epoxy/multiwalled carbon nanotube nanocomposites
    Mordina, Bablu (mordina_pol@yahoo.ie), 1600, John Wiley and Sons Inc (133):
  • [33] Impact of Ionic Liquid on the Dielectric and Mechanical Performance of Poly(Vinyl Chloride) (PVC)/Reduced Graphene Oxide (RGO) Nanocomposites
    Hafusa, Akhina
    Nair, M. R. Gopinathan
    Kalarickal, Nandakumar
    Thomas, Sabu
    MACROMOLECULAR SYMPOSIA, 2021, 398 (01)
  • [34] Physical properties of electron beam irradiated poly(vinyl butyral) composites with carbamate, imidazole, and tetrazolium dye
    Said, Hossam M.
    Ali, Z. I.
    Ali, Hussein E.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (06) : 4358 - 4365
  • [35] Modification and characterization of poly(ethylene-co-vinyl alcohol) by glycosidation reaction
    Liu, Binyuan
    Xue, Zhixin
    Liu, Lu
    Zhang, Li
    Liu, Fang
    Journal of Applied Polymer Science, 2006, 102 (01): : 227 - 232
  • [36] A high-resolution solid-state NMR investigation of molecular mobility of poly(methyl methacrylate)/poly(vinyl pyrrolidone)/poly(ethylene oxide) ternary blends
    Diniz, Teresinha M.F.F.
    Tavares, Maria I.B.
    Journal of Applied Polymer Science, 2006, 100 (02): : 1492 - 1495
  • [37] Thermal and structural characterization of nanofibers of poly(vinyl alcohol) produced by electrospinning
    Giterrini, Lilia M.
    De Oliveira, Maurício P.
    Branciforti, Marcia C.
    Custódio, Tassiana A.
    Bretas, Rosario E.S.
    Journal of Applied Polymer Science, 2009, 112 (03): : 1680 - 1687
  • [38] Effects of the addition of LiCl and CsCl salts on the mechanical properties and morphology of poly(styrene-co-methacrylate) ionomers
    Kim, Jung-Won
    Song, Ju-Myung
    Kim, Joon-Seop
    1600, John Wiley and Sons Inc., P.O.Box 18667, Newark, NJ 07191-8667, United States (108):
  • [39] Recoverable surface modification using dendritically fluorocarbon- functionalized poly(methyl methacrylate)
    Thompson, Richard L.
    Narrainen, Amilcar Pillay
    Eggleston, Stuart M.
    Ansari, Imtiyaz A.
    Hutchings, Lian R.
    Clarke, Nigel
    1600, John Wiley and Sons Inc., P.O.Box 18667, Newark, NJ 07191-8667, United States (105):
  • [40] Structure and mechanical properties of blends of poly(E-caprolactone) with a poly(amino ether)
    Granado, Ainhoa
    Eguiazábal, Jose I.
    Nazábal, Jon
    Journal of Applied Polymer Science, 2008, 109 (06): : 3892 - 3899
12345