Modification of the physical, mechanical, and thermal properties of poly(vinyl chloride) by blending with poly(ethyl methacrylate)

被引：0

作者：

Chakrabarti, Rupa ^{[1
]}

Chakraborty, Debabrata ^{[1
]}

机构：

[1] Department of Polymer Science and Technology, University College of Science and Technology, University of Calcutta, Kolkata 700009, India

来源：

Journal of Applied Polymer Science | 2007年 / 105卷 / 03期

关键词：

Blends of polyvinyl chloride) (PVC) with different ratio of poly(ethyl methacrylate) were characterized with respect to their physical; mechanical; thermal; and morphological properties. The blends indicated a gradual rise in the modulus and ultimate tensile strength values followed by a reduction in the percent elongation at break and toughness values after an initial rise compared to the base reference compound PVC. The effect of composition of the PVCPEMA blends on the thermal stability was investigated. Differential scanning calorimetric curves of the blends showed an inward shift of the PVC glass transition temperature and an upward shift in the degradation temperature. The thermomechanical analysis results also indicated thermal stability over unmodified base reference compound PVC from the softening characteristics of the different samples under study. The biphasic cocontinuous systems as explicit from the scanning electron and optical micrographs supported phase-mixing at the initial stages with subsequent phasing out tendency with increasing percentage of PEMA incorporation. The thermomechanical parameters are in conformity to their mechanicals; which have been further supported by their morphological studies. © 2007 Wiley Periodicals; Inc;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：1377 / 1384

共 50 条

[21] Properties of nano-ZnO/poly(vinyl alcohol)/poly(ethylene oxide) composite thin films
Lee, J.
Bhattacharyya, D.
Easteal, A. J.
Metson, J. B.
CURRENT APPLIED PHYSICS, 2008, 8 (01) : 42 - 47
[22] Physical, mechanical, and thermal properties of Dalbergia sissoo wood waste-filled poly(lactic acid) composites
Singh, Tej
Lendvai, Laszlo
Dogossy, Gabor
Fekete, Gusztav
POLYMER COMPOSITES, 2021, 42 (09) : 4380 - 4389
[23] Effect of the phase ratio on the particle properties of poly(vinyl chloride) resins produced by suspension polymerization
Etesami, N.
Nasr Esfahany, M.
Bagheri, R.
Journal of Applied Polymer Science, 2008, 110 (05): : 2748 - 2755
[24] Preparation of hydrophilic woven fabrics: Surface modification of poly(ethylene terephthalate) by grafting of poly(vinyl alcohol) and poly(vinyl alcohol)-g-(N-vinyl-2-pyrrolidone)
Erdoğan, Meryem Kalkan
Akdemir, Özgür
Hamitbeyli, Agamirza
Karakışla, Meral
Journal of Applied Polymer Science, 2020, 137 (16):
[25] Ecofriendly poly(vinyl alcohol) and coconut shell powder composite films: Physico-mechanical, thermal properties, and swelling studies
Ramaraj, B.
Poomalai, P.
Journal of Applied Polymer Science, 2006, 102 (04): : 3862 - 3867
[26] Mechanical properties of poly(Ε-caprolactone) and poly(lactic acid) blends
Simões, C.L.
Viana, J.C.
Cunha, A.M.
Journal of Applied Polymer Science, 2009, 112 (01): : 345 - 352
[27] Plasticized poly(lactic acid) with low molecular weight poly(ethylene glycol): Mechanical, thermal, and morphology properties
Chieng, B.W. (chieng891@gmail.com), 1600, John Wiley and Sons Inc (130):
[28] The effect of the addition of poly(styrene-co-glycidyl methacrylate) copolymer on the properties of polylactide/poly(methyl methacrylate) blend
Anakabe, Jon, 1600, John Wiley and Sons Inc (133):
[29] Effect of poling on the mechanical properties of β-poly(vinylidene fluoride)
Costa, CM
Sencadas, V
Mano, JF
Lanceros-Méndez, S
ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 951 - 955
[30] Physical, mechanical, and transdermal diltiazem release analysis of nanosilica tailored various poly(vinyl alcohol) membranes
Bandyopadhyay, A. (abpoly@caluniv.ac.in), 1600, John Wiley and Sons Inc (130):

← 1 2 3 4 5 →