Minimum cutting depth and cutting depths' effects to chip's shape and size in orthogonal cutting of CFRP

被引：0
作者：
Miah F. [1 ]
Lachaud F. [1 ]
De Luycker E. [2 ]
机构：
[1] Institut Clément Ader (ICA), CNRS, INSA, ISAE-SUPAERO, Mines Albi, UPS, Université de Toulouse, Toulouse
[2] Laboratoire Génie de Production, LGP, INP-ENIT, Université de Toulouse, Tarbes
来源：
International Journal of Machining and Machinability of Materials | 2021年 / 23卷 / 5-6期
关键词：
Carbon fibre reinforced polymer; CFRP; Chip size; Cutting depth; Fibre orientation; Orthogonal cutting;
D O I：
10.1504/IJMMM.2021.121205
中图分类号：
学科分类号：
摘要：
Studying chip's shape and size is an important part in carbon fibre reinforced polymer (CFRP) cutting technique as the generated chip's size and shape are closely linked to the chip generation process. In this present research work, an experimental analysis has been done to analyse the cutting depths' effect to the generated chip's shape and size. Five different cutting depths from 0.1 mm to 1 mm were used in the tests. A strong influence of cutting depth as well as fibre orientation to chip's shape and size was found. Apart from that, the answer of what is the minimum cutting depth below which a tool cannot cut the materials smoothly was studied. Four fibre orientations have been used separately; and the minimum cutting depth was studied at each fibre orientation. The results showed that the minimum cutting depth is not the same at each fibre orientation. Copyright © 2021 Inderscience Enterprises Ltd.
引用
收藏
页码：434 / 453
页数：19
相关论文
共 23 条
  • [1] Anand R.S., Patra K., Steiner M., Size effects in micro drilling of carbon fiber reinforced plastic composite, Prod. Eng. Res. Devel, 8, pp. 301-307, (2014)
  • [2] Aramcharoen A., Mativenga P., Size effect and tool geometry in micromilling of tool steel, Precision Engineering - Journal of The International Societies for Precision Engineering and Nanotechnology - Precis. Eng, 33, 4, pp. 402-407, (2009)
  • [3] Arola D., Sultan M.B., Ramulu M., Finite element modeling of edge trimming fiber reinforced plastics, Journal of Manufacturing Science and Engineering, 124, 1, pp. 32-41, (2002)
  • [4] Ashmawi T.H., Lebrao G.W., Lebrao S.M.G., Bordinassi E.C., Study of surface roughness and burr formation after milling of carbon fiber/titanium stacks, Materials Research, 22, (2019)
  • [5] Cepero-Mejias F., Curiel-Sosa J.L., Kerrigan K., Phadnis V.A., Chip formation in machining of unidirectional carbon fibre reinforced polymer laminates: FEM based assessment, 2nd CIRP Conference on Composite Material Parts Manufacturing, pp. 302-307, (2019)
  • [6] Klinkova O., Rech J., Drapier S., Bergheau J-M., Characterization of friction properties at the workmaterial/cutting tool interface during the machining of randomly structured carbon fibers reinforced polymer with carbide tools under dry conditions, Tribology International, 44, 12, pp. 2050-2058, (2011)
  • [7] Lasri L., Nouari M., El Mansori M., Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept, Composites Science and Technology, 69, 5, pp. 684-692, (2009)
  • [8] Li H., Qin X., He G., Jin Y., Sun D., Price M., Investigation of chip formation and fracture toughness in orthogonal cutting of UD-CFRP, International Journal of Advanced Manufacturing Technology, 82, pp. 1079-1088, (2016)
  • [9] Liu Z., Shi Z., Wan Y., Definition and Determination of the Minimum Uncut Chip Thickness of Microcutting, The International Journal of Advanced Manufacturing Technology, 69, 5-8, pp. 1219-1232, (2013)
  • [10] Merchant M.E., Mechanics of the Metal cutting process. I. Orthogonal cutting and a type 2 chip, Journal of Applied Physics, 16, 5, pp. 267-275, (1945)
123