Performance analysis of interface tracking method - VOSET for complex two-phase flows

被引:0
|
作者
Ye Z. [1 ]
Liu Q. [2 ]
Li X. [3 ]
Yang X. [3 ]
Sun D. [4 ]
机构
[1] School of Petroleum Engineering, Southwest Petroleum University, Chengdu 637001, Sichuan
[2] School of Civil and Environmental Engineering, University of Science and Technology Beijing
[3] Ganguyi Oilfield of Shaanxi Yanchang Petroleum(Group) Co., Ltd., Yan'an 716005, Shaanxi
[4] School of Renewable Energy, North China Electric Power University
来源
Huagong Xuebao/CIESC Journal | 2011年 / 62卷 / 06期
关键词
Complex two-phase flows; Interface tracking method; VOSET;
D O I
10.3969/j.issn.0438-1157.2011.06.007
中图分类号
学科分类号
摘要
The interface tracking method-VOSET(coupled Volume-of-Fluid and Level Set method) combines the advantages and overcomes the disadvantages of VOF and Level Set. In this method, VOF was used to capture interfaces, which can completely keep the mass-conservation and overcome the disadvantage of mass-nonconservation in Level Set. A geometrical operation was used to calculate the Level Set function near interfaces, which could be used to compute the accurate curvature and smooth the discontinuous physical quantities near interfaces, then, the disadvantage of VOF, inaccuracy of curvature and bad smoothness of discontinuous physical quantities near interfaces, could be overcome. Therefore, VOSET was more accurate than VOF and Level Set. In this paper, VOSET was used to simulate the rising and coalescence of two or multi-gas bubbles. Mass conservation, feasibility of iterative geometric operation and stability of solution process of VOSET were analyzed for these complex two-phase flow problems. This research works would lay a foundation for the wide application of VOSET. © All Rights Reserved.
引用
收藏
页码:1524 / 1530
页数:6
相关论文
共 15 条
  • [1] Tryggvasson G., Bunner B., Esmaeeli A., A front tracking method for the computations of multiphase flow, J. Comput. Phys., 169, pp. 708-759, (2001)
  • [2] Rider W.J., Kothe D.B., Stretching and tearing interface tracking methods, (1995)
  • [3] Hirt C.W., Nichols B.D., Volume of fluid(VOF) method for the dynamics of free boundary, J. Comput. Phys., 39, pp. 201-225, (1981)
  • [4] Youngs D.L., Time-dependent Multi-material Flow with Large Fluid Distortion Numerical Method for Fluid Dynamics, pp. 273-285, (1982)
  • [5] Ashgriz N., Poo J.Y., FLAIR: flux line-segment model for advection and interface reconstruction, J. Comput. Phys., 93, pp. 449-468, (1991)
  • [6] Li C., Li J., Liu J., Zhang L., Liu C., Li Y., Simulation of two-phase flow field in CTST-8 with VOF method, Journal of Chemical Industry and Engineering(China), 58, 4, pp. 881-886, (2007)
  • [7] Osher S., Sethian J.A., Fronts propagating with curvature dependent speed: algorithms based on Hamilton-Jacobi formulations, J. Comput. Phys., 79, pp. 12-49, (1988)
  • [8] Sussman M., Smereka P., Osher S., A Level Set approach for computing solutions to incompressible two-phase flow, J. Comput. Phys., 114, pp. 146-159, (1994)
  • [9] Sussman M., Fatemi E., Smereka P., Osher S., An improved Level Set method for incompressible two-phase flows, J. Comput. Fluids, 27, pp. 663-680, (1998)
  • [10] Yang B., Ouyang J., Zheng S., Zhao Z., Simulation of injection molding process with Level Set two-phase flow method, CIESC Journal, 60, 11, pp. 2729-2735, (2009)