Stability Mechanism Analysis of Power Synchronization Control for Grid-forming Converters

被引：0
作者：
Fang, Zheng [1 ,2 ]
Huang, Yunhui [1 ,2 ]
Yan, Wenbo [1 ,2 ]
Wang, Dong [1 ,2 ]
Tang, Jinrui [1 ,2 ]
Zhou, Keliang [1 ,2 ]
机构：
[1] State Key Laboratory of Maritime Technology and Safety, Wuhan University of Technology, Wuhan
[2] School of Automation, Wuhan University of Technology, Wuhan
来源：
Dianli Xitong Zidonghua/Automation of Electric Power Systems | 2024年 / 48卷 / 19期
基金：
中国国家自然科学基金;
关键词：
dynamic characteristic; grid-forming converter; power synchronization control; small-signal stability;
D O I：
10.7500/AEPS20240113001
中图分类号：
学科分类号：
摘要：
Grid-forming converters have the ability to actively construct the grid, which can provide damping and frequency support for the power grid, but there are stability issues in low-impedance power grids. In order to study the stability mechanism of power synchronization control for grid-forming converters with low impedance, firstly, a small-signal model of grid-forming converters connected to the AC power grid that reflects the dynamic characteristics of power synchronization is established. Then, within the framework of Newtonian dynamics, a dynamic model of grid-forming converters connected to the low-impedance power grid is established by taking power synchronization control as the main method and the power offset is decomposed into synchronous and damping components to characterize the stability of the power synchronization control. Subsequently, by combining modal analysis and dynamic characteristic analysis, the influence of power grid strength and control parameters on power synchronization control is analyzed by studying the characteristic root trajectory and participation factor curves, as well as the changes in damping and synchronization components, and their underlying mechanisms are revealed. Finally, the conclusion is verified through a simulation model of grid-forming converters connected to the power grid. © 2024 Automation of Electric Power Systems Press. All rights reserved.
引用
收藏
页码：101 / 108
页数：7
相关论文
共 18 条
  • [1] HUANG Y H, WANG L Y，, ZHANG S D，, Et al., Impacts of phase-locked loop dynamic on the stability of DC-link voltage control in voltage source converter integrated to weak grid［J］, IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 12, 1, pp. 48-58, (2022)
  • [2] LI Mingfei, WU Zaijun, QUAN Xiangjun, Et al., Transient synchronization stability analysis of grid-forming grid-connected inverter considering damping characteristics［J］, Automation of Electric Power Systems, 47, 15, pp. 198-207, (2023)
  • [3] WANG Xinbao, GE Jing, HAN Lianshan, Et al., Theory and practice of grid-forming BESS supporting the construction of a new type of power system ［J］, Power System Protection and Control, 51, 5, pp. 172-179, (2023)
  • [4] Grid-synchronization stability of converter-based resources—an overview［J］, IEEE Open Journal of Industry Applications, 1, pp. 115-134, (2020)
  • [5] ZHANG Y Y，, HAN M，, ZHAN M., The concept and understanding of synchronous stability in power electronic-based power systems［J］, Energies, 16, 6, (2023)
  • [6] XIE Zhen, YANG Shuxin, DAI Pengcheng, Et al., Grid-side coupling analysis and suppression strategy of grid-forming full-power wind turbines［J］, Transactions of China Electrotechnical Society, 38, 14, pp. 3745-3758, (2023)
  • [7] LIU T， W, ANG X F., Physical insight into hybrid-synchronization-controlled grid-forming inverters under large disturbances ［J］, IEEE Transactions on Power Electronics, 37, 10, pp. 11475-11480, (2022)
  • [8] ZHAN Changjiang, WU Heng, WANG Xiongfei, Et al., An overview of stability studies of grid-forming voltage source converters［J］, Proceedings of the CSEE, 43, 6, pp. 2339-2359, (2023)
  • [9] HONG Z K, HOU Z Q，, Et al., Origin of anomalous instability of grid-forming converters tied to stiff grid［J］, IET Renewable Power Generation, 17, 10, pp. 2563-2574, (2023)
  • [10] LU Qiuyu, ZHENG Jianping, YANG Yinguo, Et al., Analytical method for transient stability of receiving power system with grid-forming MMC［J］, Electric Power Automation Equipment, 43, 4, pp. 69-77, (2023)
12