Assessment of reinforced concrete buildings with shear wall based on Iranian seismic code (Third Edition)

被引：9

作者：

Department of Civil Engineering, Faculty of Engineering, Noshirvani University of Technology, Shariati Avenue, P.O. Box 47144-484, Babol, Iran ^{[1
]}

机构：

[1] Department of Civil Engineering, Faculty of Engineering, Noshirvani University of Technology, Babol, Shariati Avenue

来源：

J. Appl. Sci. | 2008年 / 23卷 / 4274-4283期

关键词：

Damage distribution; Drift; Hysteretic energy; Severe earthquake; Shear wall;

D O I：

10.3923/jas.2008.4274.4283

中图分类号：

学科分类号：

摘要：

The aim of his study is to investigate the inelastic behavior of Reinforced Concrete (RC) buildings with sear wall when undergoing severe earthquakes. In this regard, the height-wise distribution of drift, hysteretic energy and damage index in RC buildings with shear wall subjected to strong ground motions were investigated. Three RC frames with shear wall, 8, 12, 15 story frames, in which lateral loading pattern was on the base of Iranian seismic code, were considered and all frames then were evaluated by performing nonlinear dynamic analyses under severe earthquakes. Consequences indicate that in severe earthquakes despite strength uniform allotment in the stories height, an intense concentration of these parameters was observed in one or two stories. This will definitely hinder the serviceability of the maximum capacity of buildings. © 2008 Asian Network for Scientific Information.

引用

页码：4274 / 4283

页数：9

共 11 条

[1]

Ganjavi B., Amiri L.V., Amiri G.G., Razavian S.A., Effect of seismic loading patterns on height-wise distribution of drift, hysteretic energy and damage in reinforced concrete buildings, J. Applied Sci., 7, pp. 3431-3441, (2007)

[2]

Karami M.R., Naggar M.H.E., Moghaddam H., Optimum strength distribution for seismic resistant shear buildings, Int. J. Solids Struct., 41, pp. 6597-6612, (2004)

[3]

Kunnath S.K., Reinhorn A.M., Lobo R.F., IDARC Version 3.0: A Program for the Inelastic Damage Analysis of RC Structures, (1992)

[4]

Moghaddam H., Hajirasouliha I., Dosstan A., Optimum seismic design of concentrically braced steel frames: Concepts and design procedures, J. Construct Steel Res., 61, pp. 151-166, (2005)

[5]

Recommended Provisions for the Development of Seismic Regulations for New Buildings, (1994)

[6]

Park Y.J., Ang A.H.S., Wen Y.K., Seismic Damage Analysis and Damage-Limiting Design of R/C Buildings, Civil Engineering Studies, (1984)

[7]

Park Y.J., Ang A.H.S., Wen Y.K., Damage limiting aseismic design of buildings, Earthquake Spectra, 3, pp. 1-26, (1987)

[8]

Takeda T., Sozen M.A., Nielsen N.N., Reinforced concrete response to simulated earthquakes, J. Struct. Div., 96, pp. 2557-2573, (1970)

[9]

Valles R.E., Reinhorn A.M., Kunnath S.K., Li C., Madan A., IDARC 4.0: Inelastic damage analysis of reinforced concrete structures, (1996)

[10]

Valles R.E., Reinhorn A.M., IDARC-2D version 6.1, inelastic damage analysis of reinforced concrete structures, (2006)

← 1 2 →