TIG welding-brazing of special flux assisted aluminum-steel dissimilar alloys

被引：0
|
作者：
Song, Jianling [1 ]
Lin, Sanbao [1 ]
Yang, Chunli [1 ]
Ma, Guangchao [1 ]
机构：
[1] State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2010年 / 31卷 / 02期
关键词：
Aluminum alloys - Fillers - High speed cameras - Metals - Welds - Inert gas welding - Butt welding - Silicon alloys - Wetting - Brazing - Gas welding - Alloy steel - Tensile strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The experiments of special flux assisted TIG welding-brazing for aluminum and steel dissimilar alloys was carried out by using Al-Si eutectic filler metal. The special flux applied to TIG heating was developed, the wetting and spreading behavior of liquid filler metal on the steel surface was observed by high-speed camera, and the typical TIG welding-brazing butt joint was analyzed. The results show the special flux can greatly promote the wetting and spreading of the filler metal on the steel surface, which the composition (mass fraction, %) is the modified Noclock flux (KAlF4: K3AlF6, 65:35) 55-78, Zn10-20, Sn10-20 and K2SiF62-5. With the action of special flux, the spreading behavior of liquid filler metal consists of two parts: one is to spread on the back face to pack the steel; the other is to uphill spread on the front face of the groove to form a sound brazed joint. A sound welding-brazing butt joint is obtained, which has a dual characteristic: in aluminum side it is a welding joint, and in steel side it is a brazing joint. The tensile strength of the butt joint reaches 115.5 MPa and the fracture occurs the interface of welded seam and the steel.
引用
收藏
页码：45 / 48
相关论文
共 50 条
  • [1] Dissimilar metals TIG welding-brazing of aluminum alloy to galvanized steel
    Lin S.-B.
    Song J.-L.
    Ma G.-C.
    Yang C.-L.
    Frontiers of Materials Science in China, 2009, 3 (1): : 78 - 83
  • [2] Effects of Si additions on intermetallic compound layer of aluminum-steel TIG welding-brazing joint
    Song, J. L.
    Lin, S. B.
    Yang, C. L.
    Fan, C. L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 488 (01) : 217 - 222
  • [3] The characteristic of interface microstructure for aluminum-steel butt joint by arc assisted laser welding-brazing
    Yu, Xiaoquan
    Fan, Ding
    Huang, Jiankang
    Kang, Yutao
    MATERIALS RESEARCH EXPRESS, 2019, 6 (09)
  • [4] Spreading behavior and microstructure characteristics of dissimilar metals TIG welding-brazing of aluminum alloy to stainless steel
    Song, J. L.
    Lin, S. B.
    Yang, C. L.
    Ma, G. C.
    Liu, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 509 (1-2): : 31 - 40
  • [5] TIG welding-brazing joint of aluminum to stainless steel with hot wire
    何欢
    林三宝
    陈哲
    范成磊
    杨春利
    China Welding, 2013, 22 (03) : 25 - 30
  • [6] Effect of ultrasonic vibration on TIG welding-brazing joining of aluminum alloy to steel
    Wu, Kanglong
    Yuan, Xinjian
    Li, Ting
    Wang, Haodong
    Xu, Chuan
    Luo, Jun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 266 : 230 - 238
  • [7] Effect of dual laser beam on dissimilar welding-brazing of aluminum to galvanized steel
    Mohammadpour, Masoud
    Yazdian, Nima
    Yang, Guang
    Wang, Hui-Ping
    Carlson, Blair
    Kovacevic, Radovan
    OPTICS AND LASER TECHNOLOGY, 2018, 98 : 214 - 228
  • [8] Investigation on TIG arc welding-brazing of Ti/Al dissimilar alloys with Al based fillers
    Lv, S. X.
    Jing, X. J.
    Huang, Y. X.
    Xu, Y. Q.
    Zheng, C. Q.
    Yang, S. Q.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (07) : 519 - 524
  • [9] Technology and Microstructure for Laser Welding-brazing Assisted by Transporting Flux with Shielding Gas between Steel and Aluminum
    Yu G.
    Chen S.
    Huang J.
    Yang J.
    Zhao Z.
    Chen, Shuhai (shchen@mater.ustb.edu.cn), 2020, Chinese Mechanical Engineering Society (56): : 50 - 56
  • [10] Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
    Lin, Sanbao
    Song, Jianling
    Ma, Guangchao
    Yang, Chunli
    Wang, Yinjie
    Hanjie Xuebao/Transactions of the China Welding Institution, 2009, 30 (07): : 9 - 12
12345